Sketchup Plugins of Chris Fullmer

  

:

      (4/2)

Record your navigation movements and export them as a series of images

Downloads: 1669                [ Version Updated: 2014-10-15 08:00:53 ]



:

      (5/6)

Center a group or component on the model origin

Downloads: 4081                [ Version Updated: 2014-10-15 08:02:07 ]



:

      (4.7/21)

Takes a component and apply it to a series of connected lines

Downloads: 13487                [ Version Updated: 2014-10-15 08:04:12 ]



:

      (4.2/21)

Copies a component onto all selected faces

Downloads: 9655                [ Version Updated: 2014-10-15 08:03:22 ]



:

      (4.5/11)

This scipt places a construction point at the centerpoint of an arc, even after the arc has been exploded in SketchUp

Downloads: 5616                [ Version Updated: 2014-10-15 07:59:05 ]



:

      (4.5/12)

Aligns the camera to the user defined axes

Downloads: 3068                [ Version Updated: 2014-10-15 08:07:03 ]



:

      (5/3)

Adds a text label to every edge that borders only one face

Downloads: 1211                [ Version Updated: 2014-10-15 08:08:33 ]



:

      (4.7/6)

Re-paints all selected faces with the color of their normal, then it changes the camera to top mode and exports an image

Downloads: 1873                [ Version Updated: 2014-10-15 08:21:59 ]



:

      (4.7/3)

Shows the cursor location and screen position, and the name of the selected component

Downloads: 974                [ Version Updated: 2014-10-15 08:09:46 ]



:

      (4.8/15)

Three Perpendicular Face tools to help create faces perpendicular to the end of lines

Downloads: 7479                [ Version Updated: 2014-10-15 08:10:27 ]



:

      (4.6/14)

Takes a selection of groups/components and scales and rotates them based on their centerpoint, the world axis, their axis location, or the component base

Downloads: 7210                [ Version Updated: 2014-10-15 08:11:08 ]



:

      (5/2)

Selects all lines of a specified length

Downloads: 1185                [ Version Updated: 2014-10-15 08:14:22 ]



:

      (4/4)

Selects only the outer edges (perimeter edges) and also edges that border an interior hole

Downloads: 2555                [ Version Updated: 2014-10-15 08:12:55 ]



:

      (4.6/73)

Bends an existing group to match a curved line or series of connected lines

Downloads: 64570                [ Version Updated: 2014-10-15 08:15:42 ]



:

      (4.6/7)

Loft between a series of splines

Downloads: 5455                [ Version Updated: 2014-10-15 08:17:45 ]



:

      (4.3/4)

Three tools to help make vertical or normal lines by clicking on a point, then enter the desired line length or elevation

Downloads: 2643                [ Version Updated: 2014-10-15 08:19:01 ]



:

      (4/3)

Imports data from Voodoo Camera Tracker, making it possible to recreate camera flightpaths in SketchUp

Downloads: 690                [ Version Updated: 2014-10-15 08:20:23 ]



:

      (5/2)

Takes the YZ coordinates from the first vertex and the X coordinate from the 2nd vertex and use those 2 points to create a new point, and it adds a construction point in that location

Downloads: 1015                [ Version Updated: 2014-10-15 08:21:15 ]




Visit our sponsors: