[Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby thomthom » Wed Sep 22, 2010 8:39 am

Pilou wrote:If some modifications are made for the V8, what are the results for the previous versions?

Should be none - Ruby 1.8.6 has stricter parsing which has been the biggest cause of the incompatibility.
0
Thomas Thomassen — SketchUp Monkey & Coding addict
List of my plugins and link to the CookieWare fund
User avatar
thomthom 
PluginStore Author
PluginStore Author
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby fredo6 » Wed Sep 22, 2010 1:18 pm

grim wrote:fredo

i realise this was just a quickie ruby but it is a good one that i use

however i am haveing trouble in SU8 is there a problem and does it need updating

regards
grim

CurviShear should work in SU8.

Do you experience problems?

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby monkeybss » Wed Sep 22, 2010 5:47 pm

Thanks, I very much needed this, life is going to be easier now...
0

monkeybss 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby grim » Wed Sep 22, 2010 11:54 pm

fredo
yes i seem to have a problem see image attached , with a single arc it works fine, with a double arc and weld plugin used i get a mess

regerds grim
0

grim 
Premium Member
Premium Member
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby fredo6 » Thu Sep 23, 2010 7:47 am

grim wrote:fredo
yes i seem to have a problem see image attached , with a single arc it works fine, with a double arc and weld plugin used i get a mess

regerds grim

Could you post the skp file so that I have a look

Thanks

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby rv1974 » Tue Oct 26, 2010 11:50 am

Hi fredo!
Please take a look at this:
http://www.scriptspot.com/3ds-max/scripts/ant-stitcher-fast-and-easy-way-to-connect-two-meshes-in-3ds-max
If only you could add a similar feature it'd become a mega hit!
0

rv1974 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby arjunmax09 » Mon Dec 27, 2010 4:50 pm

I'm trying to make a ramp using curvishear and curviloft but not getting the desired result. I've attached a video of what exactly happens during the process
0
when you fail at something....you haven't really failed...you've found one way the thing will not work out

arjunmax09 
Banned
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby jeff hammond » Mon Dec 27, 2010 5:33 pm

arjun,
try using the 3rd icon in curviloft.. skinning of shapes
0
dotdotdot
User avatar
jeff hammond 
Global Moderator
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby arjunmax09 » Mon Dec 27, 2010 5:56 pm

Jeff Hammond wrote:arjun,
try using the 3rd icon in curviloft.. skinning of shapes


i tried using that but nothing happens..can you post a video or some screenshots?? I've uploaded the model btw..
0
when you fail at something....you haven't really failed...you've found one way the thing will not work out

arjunmax09 
Banned
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby Daniel S » Mon Dec 27, 2010 6:53 pm

arjunmax09 wrote:
Jeff Hammond wrote:arjun,
try using the 3rd icon in curviloft.. skinning of shapes


i tried using that but nothing happens..can you post a video or some screenshots?? I've uploaded the model btw..


Works for me...

Like Jeff said.. try using the 3rd icon... not the first one:
skin.jpg

Here I attach the result:
rr5 low.skp


Daniel S
0

Daniel S 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby arjunmax09 » Tue Dec 28, 2010 5:33 am

Daniel S wrote:Works for me...

Like Jeff said.. try using the 3rd icon... not the first one:
skin.jpg


Daniel S


Daniel...i used the same button for making the ramp...i select all the edges but nothing happens..Please upload screenshots or a video of how you actually make the ramp...I'm using SU 8 Pro..??
0
when you fail at something....you haven't really failed...you've found one way the thing will not work out

arjunmax09 
Banned
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby Daniel S » Tue Dec 28, 2010 1:07 pm

Just select the ramp and click the button. A small video showing how the skinning of the ramp is made:
skinning a ramp.gif

I´m using SU8 Pro too.

Do you have the latests versions of Curviloft and LibFredo6?

For checking the latest version of curviloft go to "Tools>Fredo6 Collection>Curviloft>About..." should say Curviloft v1.0c.

For checking the latest version of LibFredo6 go to "Window>LibFredo6 Settings>About..." should say LibFredo6 v3.5c.

If you don´t have that versions you can download them from here: viewtopic.php?f=323&t=28586

If you have the correct ones, try to make the ramp with the ruby console open (go to Window>Ruby Console). Perhaps the ruby console shows an error that you can copy and paste here.

Daniel S
0

Daniel S 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby arjunmax09 » Tue Dec 28, 2010 3:19 pm

I had the recent versions. I just checked the way you told. But I overwrote the files with freshly downloaded ones anyway. Eventually I was able to make the ramp that you made. That file had another ramp too. I can't make that one.. I've made a new file of that ramp and a video of what exactly happens. Please check and tell me what to do.
0
when you fail at something....you haven't really failed...you've found one way the thing will not work out

arjunmax09 
Banned
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby Daniel S » Tue Dec 28, 2010 4:30 pm

arjunmax09 wrote:I had the recent versions. I just checked the way you told. But I overwrote the files with freshly downloaded ones anyway. Eventually I was able to make the ramp that you made. That file had another ramp too. I can't make that one.. I've made a new file of that ramp and a video of what exactly happens. Please check and tell me what to do.


Here you have to use another plugin called weld.rb (you can download it at http://www.smustard.com/script/Weld)

I attach a video showing how to make it work and .skp files.

Daniel S
0

Daniel S 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby arjunmax09 » Wed Dec 29, 2010 12:56 pm

Thanks Daniel...I'm finally able to make the ramp :) .. But for selecting the linear edges along one axis for welding is there a faster way rather than selecting them one by one??
0
when you fail at something....you haven't really failed...you've found one way the thing will not work out

arjunmax09 
Banned
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby Daniel S » Wed Dec 29, 2010 5:36 pm

You can try with Fredo6´s Hoverselect plugin (viewtopic.php?f=323&t=18916). But it´s not working for me. Perhaps is a SketchUp 8 issue.

Daniel S
0

Daniel S 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby kathecasta » Tue Feb 15, 2011 8:33 pm

i'm following these same instructions, and it works at creating the ramp for me, so long as i don't click "reverse curve orientation" but i need it to be reversed!
When I try to skin it using the "reverse orientation" it doesn't create the top plane for the ramp, just the sides for some reason....
anyone have any idea why this is happening?
thanks!!

Daniel S wrote:Just select the ramp and click the button. A small video showing how the skinning of the ramp is made:
skinning a ramp.gif

I´m using SU8 Pro too.

Do you have the latests versions of Curviloft and LibFredo6?

For checking the latest version of curviloft go to "Tools>Fredo6 Collection>Curviloft>About..." should say Curviloft v1.0c.

For checking the latest version of LibFredo6 go to "Window>LibFredo6 Settings>About..." should say LibFredo6 v3.5c.

If you don´t have that versions you can download them from here: viewtopic.php?f=323&t=28586

If you have the correct ones, try to make the ramp with the ruby console open (go to Window>Ruby Console). Perhaps the ruby console shows an error that you can copy and paste here.

Daniel S
0

kathecasta 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby ghassan » Tue Jun 21, 2011 3:17 pm

wow
0

ghassan 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby Tobobo » Tue Jun 21, 2011 5:40 pm

I cant believe i havent found this till now. This would have saved hours of time. :berserk:

Thank you :berserk: :berserk:
0
Toby

Philippians 4:13

I can do everything through him who gives me strength.
User avatar
Tobobo 
 

Re: [Plugin] CurviShear (to make ramps) - 25 Jun 10

Postby deprezzar » Fri Oct 28, 2011 6:50 pm

tanks Fredo!!!brilliant!!!
0

deprezzar 
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby ddtaylor » Sun Sep 23, 2012 7:18 am

thanks for sharing :sketchstatic:
0

ddtaylor 
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby keea1111 » Mon Sep 24, 2012 4:21 pm

Can someone help me install this plug in? I am on Mac and I put the whole FredoTools folder in my plugins folder, but it is not active or even visible in SU? Much thanks, Keea
0
KEEA
User avatar
keea1111 
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby mwm5053 » Mon Feb 11, 2013 12:57 pm

Great plugin but I'm doing something wrong here I'm sure. Coming up with the same results as grim earlier in this thread. Thanks for the help
0
2011 iMac
SU 2015 Pro, 2017 Make
V2 Twilight
macOS Sierra 10.12.5

mwm5053 
Premium Member
Premium Member
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby thanesuan » Tue Jun 25, 2013 4:44 am

thx a lot :ecstatic:
0

thanesuan 
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby Bertil » Sun Aug 25, 2013 7:48 pm

cant get it to work on Mac
0

Bertil 
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby cotty » Mon Aug 26, 2013 6:30 am

Bertil wrote:cant get it to work on Mac

We will need some more information to help you ...
0
User avatar
cotty 
Top SketchUcator
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby wishiyyl » Wed Nov 13, 2013 10:35 pm

Looks awesome Fredo! Congrats yet again,
0

wishiyyl 
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby urjuan » Wed Feb 12, 2014 11:10 am

Hi Everyone,

Could someone help me..is this plugin only works for curves? how bout straight ramps with curve edges only?
Thanks.
0

urjuan 
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby fredo6 » Wed Feb 12, 2014 6:20 pm

urjuan wrote:Could someone help me..is this plugin only works for curves? how bout straight ramps with curve edges only?
Thanks.

Curvishear only requires that the contour is given as Sketchup 'curves' (as shown in the Entity Info panel).

Please post a picture or the skp file for what you have in mind.

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoTools::CurviShear 1.5a - 25 Aug 11 (ramps)

Postby mohsen » Thu Dec 25, 2014 4:39 pm

How can I create this model? What is the plug?
0

mohsen 
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

PreviousNext


 

Return to Plugins

Who is online

Users browsing this forum: No registered users and 12 guests

Visit our sponsors: