Rogue's W.I.P's!

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Thu Jan 08, 2009 12:06 am

When Will it get done?
0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Thu Jan 08, 2009 12:18 am

Be patient, I am busy with lots of things at the moment. SU is one of the last things on my list. I will get it done when I get around to it.
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Thu Jan 08, 2009 2:29 pm

Ok, I think its time for an update on my Cobra.

It’s officially an unfathomable mess.

I am modeling the Original 2010 Trojan Cobra and trying to fit, along the way, the original mustang variants into the mix. Its very hard work as the Mustang line is just about as confusing as the 911 range through the years. So, I am a little bit stuck for now but a little work should help get things moving.

This is what I mean:

Original: looks like the '67 Coupe and later Mach 1, GT or Boss
2009 Trojan Cobra 1.jpg

Second re-model: Going to look like original Coupe (need to shorten roofline)
2009 Trojan Cobra 2.jpg

Third re-model: looks like the Fastback, Hertz and is going to be re-modeled to look like the GT, GT 500, GT 500KR GT 350 and GT 350E (I need to replace the window section with a scoop and a vent)
2009 Trojan Cobra 3.jpg

Plus there are a few other models. I also have to take into consideration the lights, hoods, grille, rear lights, side scoops, LM stripes and the hardest part; names.
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Thu Jan 08, 2009 10:56 pm

the names:
go on Google Transalate, choose the word in english, (make sure its english to whatever you want) then press transalate.
0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby GreenToaster » Fri Jan 09, 2009 2:39 am

It’s officially an unfathomable mess.
LOL!
0
If you really want something you won't ever stop pursuing it.

GreenToaster 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Fri Jan 09, 2009 3:32 am

KDSDESIGN wrote:the names:
go on Google Transalate, choose the word in english, (make sure its english to whatever you want) then press transalate.


I don't think you know what I mean. The names are in English, It’s the Mustang.
I just need to apply the correct names to the correct vehicle.

I think I will just model the most important Mustangs; I have Ford Mustang - The Legend Lives on PS2 so I think I'll use that as a guide.
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Fri Jan 09, 2009 8:43 am

Here is a little re-modeling for the base model.

You'll notice the roofline is shortened and that the lights, bumper skirting and boot are also changed

This is based on the original 1965 Mustang Coupe; I will also make a GT version, Convertible along with the Fastback and GT Fastback

I will then model the 1968 Mustang Coupe, GT, Convertible, Fastback, GT Fastback, GT/CS, GT 500, GT500KR, '69 MACH 1, '69 and '70 BOSS (maybe others such as the GT 350, GT 350H and any other suggestion)

(I finally made my list :D )
2009 Trojan Cobra Coupe.jpg

It looks a little RED at the moment but when the interior, wheels, grills and other details are added it will look much better.
2009 Trojan Cobra Coupe...jpg
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Fri Jan 09, 2009 12:48 pm

I have now finished the basic grille.

The 1965 Coupe had a flatter face to the 1968 so I have also shortened the front end point.
2009 Trojan Cobra Coupe.jpg
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Sat Jan 10, 2009 3:18 pm

It seems I can only talk so much before I start talking to myself again!

Come on, feedback!

Anyway, even though I haven’t finished my last Rogue Ultimatum, I have started a new one for 2010.
It is based on the Ford Kuga, as the Kuga is a Replacement for the Escape.
My Ultimatum was kind-of an Escape based SUV so the next will be based on the Kuga.
2010 Rogue Ultimatum.skp

Its only very early days
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Sat Jan 10, 2009 5:41 pm

I looked up the kuga and it said "Not to be confused with ford couger" maybe you could make a car based off a Ford Couger?
0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Sat Jan 10, 2009 6:00 pm

0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby GreenToaster » Sat Jan 10, 2009 8:17 pm

Come on, feedback!

Dude, the only thing I can say is what I've said before:

    * You are really great at modeling
    * I enjoy admiring your models
    * Your endeavors are motivational & inspirational
    * Please keep going!
    * Thanks for sharing your talents
    * I'm jealous

:D

I always watch this thread - it's one of my all time favorites, even though I don't reply much.
0
If you really want something you won't ever stop pursuing it.

GreenToaster 
 

Re: Rogue's W.I.P's!

Postby RayOchoa » Sat Jan 10, 2009 9:12 pm

hey dude rouge i really like that ford gt (i think) i don like tha back its too flat (i know thats how it really is) i really like your cars dude keep going.
0
CaR DeSiGnS bY mE
http://ray-ochoa.com
User avatar
RayOchoa 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Sat Jan 10, 2009 11:41 pm

KDSDESIGN wrote:Also, About 99% of your models are Ford-Based (im not saying thats bad) but you might want to see if you can create cars based off of other cars.

Maybe Try These
......
One of these?
......


Thansk for noticing but I often base cars of Ford in SU because the resources are avalible, such as accurate blueprints. Ford is the one car manufacturer that inspires most of my SU models. BTW, most of the cars you showed me are Concepts, I preffer to model more practical models in SU, like the Mazda 3.

KDSDESIGN wrote:I looked up the kuga and it said "Not to be confused with ford couger" maybe you could make a car based off a Ford Couger?


I like the Ford Cougar, but its too outdated now. It was concieved in the 90's and looked a bit old as soon as i rolled off the assembly line. I do, however, preffer the Mercury Cougar (the original). If I get time I will try to convert the Cobra into a Cougar.

Thanks anyway

And thanks for the comments:
GreenToaster wrote:
Come on, feedback!

Dude, the only thing I can say is what I've said before:

    ......

:D

I always watch this thread - it's one of my all time favorites, even though I don't reply much.


I Think I should take that into mind next time I think I'm talking to myself :D
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Sun Jan 11, 2009 12:54 am

I like the Ford Cougar, but its too outdated now. It was concieved in the 90's and looked a bit old as soon as i rolled off the assembly line. I do, however, preffer the Mercury Cougar (the original). If I get time I will try to convert the Cobra into a Cougar.



Well, You could put mods on it to make it look "Modern" :D

Quote mess up ._. so i deleted them
0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Sun Jan 11, 2009 3:43 pm

Damn! I am lazy!

Don't expect much major progress from me in SU for a while.
I'll try to get some minor wip's out of the way first and then maybe some of the bigger things.

To keep you at bay for a few days here is a little more stuff.
I have done a little work on the Rogue Paramount Coupe, minor but its progress.

-Seat has had a little work done
-More dash revision
-Revised model list (cut out larger models such as the Limousine and Turnier)

And a new wheel

http://sketchup.google.com/3dwarehouse/ ... c2fb5a3bda
Rogue D-020.jpg

Rogue D-020..jpg

Rogue D-020...jpg

Rogue D-020....jpg

Rogue D-020.....jpg
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Sun Jan 11, 2009 10:50 pm

Paramount coupe? i must not be following well. didnt hear of it from you before
0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Mon Jan 12, 2009 12:00 pm

Rogue Paramount Coupe.jpg

Rogue Paramount Coupe..jpg
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby BLANK » Thu Jan 15, 2009 12:23 pm

Is it me or will the D-020 go perfectly with the Taunus? Hmm...
0
If only the Yakuza had heard of Australia...

Ford Falcon sedan conversion


BLANK 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Thu Jan 15, 2009 4:25 pm

BLANK wrote:Is it me or will the D-020 go perfectly with the Taunus? Hmm...


Well, I was hoping for it to go well with it but I need to make new, higher profile tyres if it will look right.

To quote Jeremy Clarkson, "It looks like a drug dealers car", with low profile tyres
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Fri Jan 16, 2009 3:50 am

TopGear lol. yeah it kinda does.
0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby BLANK » Sat Jan 17, 2009 10:11 am

Moar updates on the Cobra please. I acually like the no-quarter-window look. I've done something similar to a Shelby GT500.
n1.png

n3.png

And the racing model.

n2.png

n4.png


Or you could try the Saleen look.
example1.png
0
If only the Yakuza had heard of Australia...

Ford Falcon sedan conversion


BLANK 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Sat Jan 17, 2009 10:59 am

Those are really great models, I think you pulled them off well.
I hope you post them in the Warehouse or here at least

I don’t really have any updates on the Cobra but I can tell you that there will be soon (I hope)

I was hoping to do the engine and running gear but I'm useless at it without proper reference, so if anyone can give me any worth while help, that would be appreciated

For now I will share with you a model of the base Mustang as it is today
If you wish for me to send you the model contact me via a PM

The conditions are that it not be uploaded in any form to any website until my final model is available in the Warehouse
0
Last edited by Rogue® on Sun Jan 18, 2009 2:08 am, edited 1 time in total.
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby BLANK » Sat Jan 17, 2009 2:46 pm

Hmmm... wasn't the model available here a while ago? I've been sitting in front of the Pc all day, working on the model and constantly pressing F5. It's just a while ago I thought "Oh wait, I'm human too". So I got up, got something to eat and sat in front of the TV.

Just as I got back, I saw the model gone. Good idea though, since the shenanigans aren't just limited to the warehouse.

I'm also thinking of that huge D.T Homework and the upcoming mega Physics test as I type. Right... :o
0
If only the Yakuza had heard of Australia...

Ford Falcon sedan conversion


BLANK 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Sat Jan 17, 2009 4:03 pm

Yeah, the model was available but then I thought it wasn’t a good idea to just post it without thinking of what people will most likely do with the chance.

It’s still a kept model mesh so I don’t really want it leaked or claimed by some noob.
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Sat Jan 17, 2009 4:19 pm

yeah i know those noobs (im guessing your talking about TheWhatever. Steals your models and says you stole them. ignore those noobs.)
0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Mon Jan 19, 2009 5:56 am

Here is a little revision I have done to the Rogue Sentient.

After the release of the new Taurus I have been experimenting with some new shapes.

I have changed the side rear windows, the roof line and side have changed a bit, the rear boot and bumper etc are being changed as are the front hood and bumper etc.

I am only playing with the design at the moment so no real progress.

Rogue Sentient.jpg

Rogue Sentient..jpg

Rogue Sentient...jpg

Rogue Sentient....jpg

Rogue Sentient.....jpg

Rogue Sentient......jpg
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Wed Jan 21, 2009 3:22 am

Here are what the high wall tyres look like when added to the mix:
http://sketchup.google.com/3dwarehouse/ ... 749ab367e2

Rogue Paramount Coupe.jpg

Don’t you think it gives it depth?

Rogue Paramount Coupe rear.jpg
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

Re: Rogue's W.I.P's!

Postby KDSDESIGN » Wed Jan 21, 2009 9:53 pm

Back end looks like a cheap 80's 80s car. Front is phonomenal. thats kinda wierd.
0
Regards,
█Kevin█

(about 20% done)

KDSDESIGN 
 

Re: Rogue's W.I.P's!

Postby Rogue® » Thu Jan 22, 2009 1:55 am

KDSDESIGN wrote:Back end looks like a cheap 80's 80s car. Front is phonomenal. thats kinda wierd.


That’s because it’s based of a cheap 80's car; The Ford Cortina, Taunus

I have also done some more revision:
-Textures edited
-Rear Lights edited
-Fuel cap edited
-Rear side windows stretched
0
Find all my models on the 3D Warehouse
User avatar
Rogue® 
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

PreviousNext


 

Return to Gallery

Who is online

Users browsing this forum: No registered users and 8 guests

Visit our sponsors: