Rogue's W.I.P's!

[KDSDESIGN]

i noticed that you have locked your models. good idea.

[Rogue®]

Here are some pics of more Cobras

These versions are based on the 1968 Mustang Coupe and Fastback

2009 Trojan Cobra Coupe GT

2009 Trojan Cobra Coupe GT V8.jpg

2009 Trojan Cobra Coupe GT V8 rear.jpg

2009 Trojan Cobra Fastback V8

2009 Trojan Cobra Fastback V8.jpg

2009 Trojan Cobra Fastback V8 rear.jpg

2009 Trojan Cobra Fastback GT V8

2009 Trojan Cobra Fastback GT V8.jpg

2009 Trojan Cobra Fastback GT V8 rear.jpg

[BLANK]

Nice. Any side views of the cars? The fastback really looks hot, but I can't really figure out the real shape by the 3/4 view.

[Rogue®]

Thanks Shams. I will send you the model (not for sharing) but here are some pics any way.

2009 Trojan Cobra Fastback V8 side.jpg

2009 Trojan Cobra Fastback V8 side wire.jpg

2009 Trojan Cobra Fastback V8 top.jpg

2009 Trojan Cobra Fastback V8 top wire.jpg

2009 Trojan Cobra Fastback V8 rear.jpg

2009 Trojan Cobra Fastback V8 rear wire.jpg

2009 Trojan Cobra Fastback GT V8 rear - side wire.jpg

[Rogue®]

Well... As Ford did, I do...

I will be making a GT/CS and other Shelby models before I show you the next version of the Cobra, which I have already made. They are based on the 1969 Mustang, Mach 1 and Boss models

For now: 1970 Cobra Jet

2009 Trojan Cobra Jet V8.jpg

2009 Trojan Cobra Jet V8 rear.jpg

[BLANK]

What? And nothing about the best mustang ever?

Parnelli-stang.jpg

Saleen made a modern interpretation of the '70 Trans Am Mustang, but it was just another mustang with a colour scheme and a chin spoiler. Now, I've seen your models and I know it's possible for you to make a proper modern version. I'm currently working on it, so let's see what we come up with.

[Rogue®]

Screw it! I'll show you the models anyway
You will notice the changes if you compare it closely to the Cobra Jet, there are quite a lot

This is based on the 1969 Mustang

2010 Trojan Cobra.jpg

2010 Trojan Cobra rear.jpg

The Mach 1

2010 Trojan Cobra Mach.jpg

2010 Trojan Cobra Mach rear.jpg

Maybe this will tickle your fancy. It’s similar to that Mustang model but I will be making that one also

2010 Trojan Cobra Boss.jpg

2010 Trojan Cobra Boss rear.jpg

[BLANK]

Yeah, the front fascia is a lot mean-looking now, and the trunk is cleaner than the V8 Fastback.

Great minds think alike. I did the same thing with my version.

PanStang.png

[Rogue®]

Your version looks good. I will start work on my proper version tomorrow maybe. I don't think I'll actually do any Shelby version of the Mustang. I might, however, make a Stallion version, maybe even a new Cougar...
There are noticeable differences between mine and yours. I have revised: The front bumper, lights, extended the hood, revised the rear quarter windows, the line flowing just below the side window has been smoothed out, the boot lid and spoilers, the tail lights, the rear bumper have all been changed as well.I would like to see yours in more detail some time.

[Rogue®]

Well, I have done some revision to the 2010 Cobra. I have changed the kink in the line along the side of the car.

I don’t think I will be able to replicate the Mustang you wanted Shams...Sorry
But I will still try.

The 2010 models are uploaded

[Rogue®]

BLAH!

More work on my Speedster thing

Further meshing, reduced polys at the front, more revision to the roof, side profile, wheel positions, shorther front, wider body, splitter added and a bit more...

Rogue Speeder front.jpg

Rogue Speeder front wire.jpg

Rogue Speeder rear.jpg

Rogue Speeder rear wire.jpg

Tell me what you think, be honest, I want some feedback...!

[BLANK]

Cool! The rear is starting to shape up nicely. But it's too early for a judgement, because I was going to point out that the roof should be a bit more curved on the edges.

[Rogue®]

Thanks Shams. I am trying to fix that problem and I have taken steps to fix it but I cant tell if it will make much difference until I start the finishing process.

[Rogue®]

I was a little board so I decided to muck around with a new Maverick...
Its getting there

2009 Rogue Maverick.jpg

2009 Rogue Maverick rear.jpg

2009 Rogue Maverick rear high.jpg

I have also done work on my Stentorian Coupe series. I have added new seats, work done to the interior, body work still being done as there will be 3 or more Generation models, reduced the underbody detail and decided to not have an engine.

[Rogue®]

More work on the Falcon Fastback.
I have reached the final stages of the process so expect to see more pics of it soon.

Falcon.jpg

Rogue D-030.jpg

Rogue D-030 ..jpg

Rogue D-030 ...jpg

Rogue D-030 ....jpg

[thomthom]

Nice. Real nice. I like the old classics.

[BLANK]

SWEET! Can't wait to see that Falcon upclose.

A suggestion for the Maverick:

That grille, I'm doing the same with my version of the Cobra (except mine has a chrome accent around the grille) and it looks pretty good.

[Rogue®]

Thanks Shams. I have planned on making something similar, like I done with the last Maverick.

[Rogue®]

Sorry but no more work has been done on my Maverick but I have started another.

I have attempted this model type many times, try to guess what it's based on...

2010 Trojan Cobra

2010 Trojan Cobra.jpg

Now the new body type

2010 Trojan Cobra GT S.jpg

I havn't an official name for it yet

[Rogue®]

Here is the Cobra GT S and the new Rogue Maverick:

2010 Trojan Cobra GT S.jpg

2010 Trojan Cobra GT S rear.jpg

2010 Rogue Maverick.jpg

2010 Rogue Maverick rear.jpg

2010 Rogue Maverick wire.jpg

[BLANK]

Nice work on that grille; looks very Saleen-ish with the revised front end. But that new front end on the Cobra GT S is messing with my perceptions. Moar pics plz...?

That rear is epic by the way.

[Rogue®]

Thnaks Shams

Sure, here are some more pics

2010 Trojan Cobra GT S.jpg

2010 Trojan Cobra GT S 1.jpg

2010 Trojan Cobra GT S 2.jpg

2010 Trojan Cobra GT S 3.jpg

[•BTM]

Really nice job!
Hey, rogue, I've been trying my luck at making a car, the BMW Z4 to be exact, but I'm not that great if you know what I mean . I managed to get the main body, and am going to add headlights+taillights next, but don't exactly know what to do. I can post the model here if you want to have a look yourself, but for now, Any advice?

BMW.Z4.png

BMW.Z4.2.png

BMW.Z4.3.png

[Rogue®]

Looking great so far.
I can suggest drawing an outline of the lights on the blueprints then extruding through the mesh. Clean up the outline on the mesh a little bit and turn it into a component. Try to add the detail of the light inside this component but as a separate group.

If you need any other help I will be glad to try.

[BLANK]

Ahh, I see what you did there. So, the front fender have been stretched but the headlights are in the same place, right? I'm definitely doing that to my version.

That's some awesome work there BTM. I'm still scared to start working on an Audi RS6. I got blueprints set up and all, but don't have the confidence on starting it. Looks like it's back to watching Rogue's videos for me...

[Rogue®]

Ah, both, in fact. I have taken the area around the lights forward making the hood and side panels longer in the front; I have taken the lights back to the grille to give it more depth too.

Hey Shams, no need to feel bad about that. I feel the same way whenever I start a new model.

[•BTM]

Thanks guys
I've got more done, but no interior (yet). So far I've made a very simple car (ferret armored car), a simple car (volkswagen 'thing' (type 181), and even though I've tried making interiors before, for this car, I have no clue where i should start, or what I should do.

BMW.Z4.4.png

BMW.Z4.5.png

[Rogue®]

That is looking very, very good. May I suggest:
http://www.youtube.com/profile?user=Rog ... iew=videos

Take a look at the 3 interior modeling videos.

I hope it helps

[•BTM]

They seem helpful, i'll have to try it
For now though, I fixed up a few things, including the sides, and tail lights. will fix the front end up a bit next.

BMW.Z4.6.png

[BLANK]

Happy Birthday!

Sorry about the delay though...