Wall cutting window

Share your SketchUp models, materials and styles

Wall cutting window

Postby shawb » Thu Mar 26, 2020 12:28 pm

My take on the multiple wall surface cutting operation. Not really a 'proper' solution but might be useful to someone! The idea was to enabled the window to be moved about looking something like the final unit before committing to cutting the walls.

Window 01.jpg


Each instance of the window component has to be exploded to cut the walls but only when a final position is settled. Until then the window can be moved around with a 2D representation of the window showing how it will look. The 2D element is located a couple of millimetres proud of the wall surface to avoid Z fighting. It is also on a separate layer that can be turned off after exploding or deleted entirely.

Window 02.jpg


Window 03.jpg


Multi-cut window v2015.skp


There are four separate cutting components nested within the main window component. The component could be made dynamic to suit different wall thicknesses. SKP file attached to have a pick through if desired.
1

shawb 
 

Re: Wall cutting window

Postby shawb » Thu Mar 26, 2020 2:55 pm

Just noticed a small gap around the outer reveal - fixed. Updated SKP.
2

shawb 
 

Re: Wall cutting window

Postby shawb » Mon Aug 31, 2020 9:50 pm

A variation to add to this post. This window does not use a dummy frame to aid placement. Instead, The window component is exploded straight after insertion. Each cutting sub-component and the window itself has a red 'Gizmo' as part of the component. These are placed away from the wall so they can be selected more easily. All the gizmos are occupying the same position. Now, by selecting the gizmos, the window plus it's wall cutters can all be moved together. The gizmos are on a layer (Tag) of their own and this can be turned off when not required.

I have added a simple setting out range for bricks, in this case 225mm for a brick and one mortar joint. Using this, windows & doors etc. can be set out to make the bricklayers' life easier!
0

shawb 
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 



 

Return to SketchUp Components, Materials & Styles

Who is online

Users browsing this forum: Elyboy and 1 guest

Visit our sponsors: