New 3d Machines Unveilings & Pens, Scanners, Elements Idems

Get 3D Printing support, tips and tricks for SketchUp

Moderators: d12dozr, dukejazz

New 3d Machines Unveilings & Pens, Scanners, Elements Idems

Postby dukejazz » Fri May 16, 2014 4:36 pm

New 3d Machines Unveilings, Pens, Scanners, Elements & Idems
( Highlight web title, right click, click search engine and then goto web site )

Airwolf 3D Unveils AW3D HDx 3D Printer For Polycarbonate and Nylon Printing | 3DPrint.com


Are Both Apple And Google Secretly Working on 3D Printers? | 3DPrint.com



MOD-t 3D Printer Will Be Priced at Under $300 – Indiegogo Campaign Launching May 28 | 3DPrint.com


Autodesk 3D Printer To Demonstrate Open Source Platform 'Spark' Soon | crazyengineers.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Sat May 17, 2014 8:50 am

New 3d Machine Unveilings
( Highlight web title, right click, click search engine and then goto web site )

New 3D Printer to Print Faster Than a Desktop Printer - 3D Printing | 3dprinting.com

Autolift Precision 3D Printer Hot Ends by Dglass 3D — Kickstarter | kickstarter.com
Analyst claims Apple is developing a 3D printer - iPhone Hacks | #1 iPhone, iPad, iOS Blog · Jason
3D Printing Goes Mainstream With This Low-Cost Next Generation 3D Printer | Resilient Communities

3D Printers - Active Robots | active-robots.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Sun May 18, 2014 9:08 am

New 3d Machine Unveilings
( Highlight web title, right click, click search engine and then goto web site )

Kudo3D Titan 1 SLA 3D Printing coming to Kickstarter! | 3dprintboard.com
3ders.org - Farsoon China unveils new 402 SLS 3D printer with fastest scan speed | 3ders.org

3ders.org -German RepRap ships 1000th NEO desktop 3D printer | 3ders.org
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby Dave R » Mon May 19, 2014 10:59 am

Don't forget this one.

It was demoed at the Maker Faire in S.F. this past weekend. See it here

:)
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: New 3d Machine Unveilings

Postby dukejazz » Mon May 19, 2014 2:50 pm

by Dave R » Today, 2:59 am

Thanks Dave R
--------------------------
New 3d Machine Unveilings
( Highlight web title, right click, click search engine and then goto web site )

Analyst: Apple preparing to enter the 3D printing market - Apple Daily Report | appledailyreport.com

The Builder Dual-Feed 3D printer 3DPrinter4U | 3dprinter4u.com


This 3D Printer is Basically Star Trek's Replicator and Transporter Rolled Into One Machine | Tom Pritchard


da Vinci 3D Printer Manufacturer, XYZPrinting, Set to Announce New Line of Affordable ... | 3DPrint.com

XYZprinting targets Middle East market with 3D printers | Channel EMEA
EOS M 290 Metal System Launched | Ten Links
Sculptify's 3D Printer, Including FLEX Pellet Printing Technology, Launches on Kickstarter | 3DPrint.com

Is Google Developing a 3-D Printer? Should 3D Systems and Stratasys Be Concerned? | Motley Fool
---------------------------------------------------
Renishaw AM250 3D printer | sketchucation.com -by watkins
http://sketchucation.com/forums/viewtopic.php?f=388%26amp;t=57789
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Wed May 21, 2014 9:22 am

Introducing the LulzBot TAZ 4 3D Printer| lulzbot.com

3D Printer in The Movie 'Neighbors' - 3D Printing Forum | 3dprintboard.com

MakerBot Starts Shipping the MakerBot Replicator Mini Compact 3D Printer | stratasys.com

Monoprice's Low Cost 3D Printer | fabbaloo.com

Draw In The Air With The LIX 3D Printing Pen | hashslush.com
Another, All Metal, Open Source 3D-printer is on Kickstarter: Mamba3D | open-electronics.org
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Wed May 21, 2014 6:25 pm

3D Systems Announces Cube(R)3 and CubePro(TM) 3D Printers Availability | Wall Street Journal
Why The Hewlett-Packard Gravy Train Won't Stop After Its Q2 Report (HPQ) | Seeking Alpha
Google's next move could be to enter the 3D printing market | PFhub
World's cheapest 3D printer moves forward | Gizmag

$199 QU-BD One Up 3D Printer Now Available In New Vibrant Colours (video) | Geeky gadgets
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby xiombarg » Thu May 22, 2014 4:04 am

I'm surprised at how many FDM printers are doing the same thing as everybody else without anything new or innovative, but I guess this at least helps push the industry forward with competitive pricing.

It's great to see so many players getting into stereolithography. I'm interested to see the rap sheet on the Autodesk printer.
Hopefully we will continue to see prices come down. I would love to see a good SLA printer for around $1500.
0
User avatar
xiombarg 
 

Re: New 3d Machine Unveilings

Postby xiombarg » Thu May 22, 2014 4:29 am

I'm also continually surprised by Makerbots crappy specs. The layer resolution on this Mini is 200 microns! That stinks. I also don't think any of their machines are self leveling. Ugh.
0
User avatar
xiombarg 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Thu May 22, 2014 6:43 am

"I'm surprised at how many FDM printers are doing the same thing as everybody else without anything new or innovative, but I guess this at least helps push the industry forward with competitive pricing." -by xiombarg » Today, 8:29 pm


Expiration of key patents is the cause -dukejazz

( Highlight web title, right click, click search engine and then goto web site )

3D printing will explode in 2014, thanks to the expiration of key patents |By Christopher Mims


"It's great to see so many players getting into stereolithography. I'm interested to see the rap sheet on the Autodesk printer." -by xiombarg » Today, 8:29 pm

Autodesk to launch its own 3D printer this year! | by Mike Lucey
http://sketchucation.com/forums/viewtopic.php?f=388%26amp;t=57727

Autodesk Questions and Answers | images.autodesk.com

Autodesk announced its consumer 3D printer at the MakerCon conference in California, along with an open-software 3D printing platform called 'Spark'.

Autodesk's new printer uses Stereolithography (SLA) technology to create objects. SLA 3D printer hardens liquid plastic (photopolymer) with an ultraviolet (UV) layer by layer and converts liquid plastic into solid objects. The process can deliver smoother and more complex objects than desktop FDM 3D printers.

The price is not revealed, but Autodesk CEO Carl Bass said it would likely be in the $5,000 range. Both the printer and the platform will be available "later this year," said the company.

"Hopefully we will continue to see prices come down. I would love to see a good SLA printer for around $1500." -by xiombarg » Today, 8:29 pm

Not SLA For $1500
you can buy a nice FDM DIY kit.
DIY kit - 3ders.org - price compare 3D printers | 3ders.org/
Not For $1500
3D Systems announces new $4,900 micro-SLA 3D printer | 3ders.org
Dec.5, 2013


3ders.org - Farsoon China unveils new 402 SLS 3D printer with fastest scan speed | 3ders.org

Specs:
Effective building volume: 400mm x 400mm x 450mm
Building speed: 17mm/hour
Layer thickness: 0.08mm~0.15mm
Laser type: CO2, 100 W
Galvo scanning system: dynamic focusing high-accuracy Galvo scanning system (CSI)
Laser power control system: Digital signal (high precision and good anti-jamming)
Scan speed during building: 12.7m/s
Powder feeding mode: Two-way powder feed system with a single feed cartridge
Printer size: 2660 x 1600 x 2010 mm
Power Supply: 380VAC,50/60Hz,15KVA,3-phase
Software: Manual and automatic control mode; Online real-time build parameters modification; Three-dimensional Visualization; Diagnostic function.
no price listed here.

I will post all new SLA & Autodesk printer info here bekow as I see them here for you -dukejazz
$3299
Kudo3D Titan 1 high performance DLP SLA 3D printer | diy3dprinting.blogspot.com

Kudo3D Titan 1 key features:
•Stereolithography (SLA) printing technology: Bottom-up SLA configuration
•Patent Pending PSP (Passive Self-Peeling) technology:
•Flexible resin container (VAT) design
•Enhanced printing performance and quality
•Simplified printer structure
•Superior reliability: modularized with heavy duty high quality components
•Adjustable DLP to optimize printing performance
•Compatible to all SLA photoresins sensitive to 400nm light


Be real the price range of SLA is $3299 - $1,000,000 US dallors
No SLA For $1500

"I'm also continually surprised by Makerbots crappy specs. The layer resolution on this Mini is 200 microns! That stinks. I also don't think any of their machines are self leveling. Ugh." -xiombarg » Today, 8:29 pm


I see you like SLA over FDM
FDM easiier and ceaper to use.
Makerbots Mini has some great specs for a FDM Technology

Here are the key specs of the Replicator Mini:
•Printing Technology: FDM
•Build Volume: 10 L x 10 W x 12.5 H cm (3.9 L x 3.9 W x 4.9 H in)
•Layer Resolution: 200 Microns
•Filament Diameter: 1.75 mm
•Nozzle Diameter: 0.4 mm
•Camera Resolution: 320x240 pixels
•File Types Supported: STL, OBJ, Thing, MakerBot
•Retailing at $1,375

The layer resolution on this Mini it made to be use by home software that only give .0002 or 200 microns! accerccy -dukejazz

patents are still on the self leveling machines -dukejazz
and they look pricy to make

I saw one that you can make
Build Platform Levelling - Makerbot 3D Printers Wiki | makerbot.wikia.com/

Automated Bed Leveling For 3D Printers Is Now Solved | April 15, 2014 By Brian Benchoff
Ask Hackaday: Auto Bed Leveling And High Temperature Force Sensitive Resistors | March 19, 2014 By Brian Benchoff
1
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Thu May 22, 2014 10:48 am

New 3d Machine Unveilings
( Highlight web title, right click, click search engine and then goto web site )

3D Printing: Autodesk Bids To Become The 'Android' of the 3D World | gilcommunity.com
EPO - Finalist Non-European countries - 3D printing (stereolithography Charles W. Hull | vieuws.eu
Cube 3D printer - Home 3D printer to turn your ideas into real objects - Cubify | cubify.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby xiombarg » Fri May 23, 2014 5:13 am

Just so people have an idea of what the difference looks like when speaking of layer resolution, here are a couple of examples.

Layer resolution of 200 microns, or .2mm
This is the current minimum layer resolution of the Makerbot mini and older FDM printers.


Layer resolution of 100 microns, or .1mm
Keep in mind that this picture example is not as magnified as most of the other pictures, so it might look smoother than some of the other examples.
Many FDM printers have this resolution including the higher end Makerbot models.


Layer resolution of 50 microns, or .05mm
This is the minimum resolution of many older SLA printers and newer FDM printers.




Layer resolution of 25 microns, or .025mm
This is the minimum resolution of the Form1 and many SLA printers (usually between 25-40 micron minimum). Some of the newer FDM printers such as the Cel-Robox have also announced such resolution capability by controlling the resin flow by valves instead of merely controlling the feed rate of the filament as it passes through the nozzle, hence getting a more refined stream.
3
Last edited by xiombarg on Fri May 23, 2014 4:24 pm, edited 1 time in total.
User avatar
xiombarg 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri May 23, 2014 8:35 am

I look at SLA printer as a (level 2) printer, high detail prints HD, fast, high power, aim for the business world

I look at FDM printer as a (level 1) printer, low detail prints LD, low power, aim for the home users

A Pro users would have a uses for both one for prof and one for finial

A new design type of FDM printer is coming that can switch gears to a smaller gauge filament

A Microscope-Inspired Extruder Design Could Add Fine Detail To 3D Prints | TechCrunch
"The various head sizes will allow users to print large gauge plastic for the structural parts of a 3D print and thinner filament for the finer parts. This improves the resolution of the outside surface while improving stability for the inside parts. When the head spins it can cut off the hot filament for a moment and then extrude it after it heats up. This could add a little time to the printing process, but it’s definitely a cool idea."

"Why is this important? Because this sort of printing, called fused deposition modeling, though expanding, is highly limited in terms of resolution and speed. There are far better ways to print out there, but FDM is the cheapest and this could both save time and filament as it extrudes fat lines where things can be messy and fine lines when high-resolution detail is needed."
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Sat May 24, 2014 8:30 am

In the News 3d Machine
( Highlight web title, right click, click search engine and then goto web site )

Kudo3D Launching Kickstarter Campaign for Titan 1 DLP 3D Printer | 3dprintinginsider.com


3D Printers for Sale | 3D Printing Color | 3dprintingcolor.com
"Setting The Standard
In Desktop 3D Printing,
Desktop 3D Scanning, and 3D Entertainment"

Low Cost 3D Printer - RepRapPro Ormerod » DesignSpark - RS Components | rs-online.com


Sculptify's FLEX: Pellets Instead of Filament - 3D Printing Industry | 3dprintingindustry.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Sun May 25, 2014 10:04 am

In the News for 3d Machine
( Highlight web title, right click, click search engine and then goto web site )

Amazon.com: UP! Mini 3D Desktop Printer, 100-240V AC, 50-60Hz, 200W: Electronics | amazon.com



Autodesk CEO: '3D printing has been way overhyped' • The Channel | channelregister.co.uk
The Autodesk 3D Printer: A Calculated Bet | Forbes

Google '3D Printing' and You Might Find an Apple | beforeitsnews.com

3ders.org - Sneak peak of Robo 3D R2 printer, Titan electronics board & new file | 3ders.org

D&H to bring RoBo3D 3-D printers to US SMBs | eChannelLine

Meg Whitman Reveals That Hewlett Packard Will Only Focus on 'Business 3D Printing' | 3DPrint.com
HP's (NYSE: HPQ) Premature Release Leads to Jump in Stock Pricing | Financialbuzz.com

New Money-Saving 3D Printing Consumables by Canada Powder | PR.com (press release)
New Money-Saving 3D Printing Consumables by Canada Powder | IT News Online
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby pilou » Sun May 25, 2014 3:19 pm

Amazing how speed this domain is evolving! :shock:
0
Frenchy Pilou
Is beautiful that please without concept!
Speedy Galerie
User avatar
pilou 
Top SketchUcator
 

Re: New 3d Machine Unveilings

Postby dukejazz » Mon May 26, 2014 9:00 am

3D Printer ( Prototype ) By Bandit-ed - Thingiverse | Thingiverse - Newest Things


Isis One 3D Printer - Isis3d | Isis3d.net

Da Vinci 1.0 3D Printer Complete Review Video | 3Dprintboard.com

Creator Wood Case 3D Printer: Amazon.com: Industrial & Scientific | Amazon.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Mon May 26, 2014 9:29 pm

3D Print Your Next House – BetAbram Plans to Sell 3D House Printers for 12000€ | 3DPrint.com


De Anza prepares for launch of 3D printer and scanner | La Voz Weekly

LittleDLPer: Open Source DLP 3D Resin Printer, Coming Soon to Kickstarter | 3DPrint.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Tue May 27, 2014 10:28 am

3ders.org - Visualize your prototypes before 3D printing them with CastAR glasses | 3ders.org
FlexTrunk - Flexible 5-Axis Machining and 3D Printing Shaft - Cable Actuated Flexure | blogspot.com


A 3D Printer for the Rest of Us: New Matter Builds $199 Device | Mashable
New 3D printing tech in works | The Tribune-Democrat
Cloudio2go Iceman 3D Printer Launches Crowdfunding Campaign on Indiegogo | 3DPrint.com

More desktop 3D Printing from Bristol | Personalize
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Wed May 28, 2014 9:26 am

New 3d Machine Unveilings
( Highlight web title, right click, click search engine and then goto web site )

3D Systems to Release Cube3 and CubePro 3D Printers | Desktop Engineering

D3D Kickstart Autolift: Retractable Hot Ends for High Performance | 3DPrint.com

Cambridge Company Unveils 3D Printed "Fruit" | Security - Slashdot

RCGroups.com 3D Printing with the ROBO 3D R1 | RCGroups.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Thu May 29, 2014 9:03 am

New 3d Machine Unveilings
( Highlight web title, right click, click search engine and then goto web site )

World's Cheapest 3D Printer Moves Forward | La3-d
Meet New Matter: A Sub-$300 3D Printer And Design Marketplace So Easy A Caveman | Pandodaily
Scribd Objet 1000 3D Printer | Scribd
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Wed Jun 04, 2014 11:21 am

New 3d Machine Unveilings
( Highlight web title, right click, click search engine and then goto web site )

Pancakebot: this drawbot builds objects from batter #3dxfood | Adafruit industries blog · matt
Kickstarter Titan 1 | Kickstarter
New matter partners with frog design and launches desktop 3d printer for under two-hundred ... | Shapeways blog on 3d printing news & innovation

New matter 3d printing ecoystem | Frog design
German startup launches 3d printing pen & $649 iceman 3d printer on indiegogo | 3Ders.Org
Autodesk Takes 3D Printing Open Source | Automation World
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri Jun 06, 2014 5:03 pm

New 3d Machine Unveilings & Other Idems
Autodesk announces new open source 3D Printer | 3DPrinterPrices.net · Andy
New Chinese 3D Printer can Print Objects the Size of Cars in Full Color | 3dprintboard.com
Cloudio2go Iceman3D Desktop 3D Printer | 3D Printer World
I've found my 3D printer | EIT ICT Labs

The MOD-t 3D Printer | fabbaloo.com
New Matter MOD-t 3D printer hits Indiegogo for $149 | TweakTown
World's Cheapest 3D Printer On IndieGogo for $149 | Tom's Guide
You Can Now Get a 3D Printer for Under $200 | Nextgov
New Matter 3D Printer MOD-t Launches on Indiegogo | The Voice of 3D Printing
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri Jun 06, 2014 5:05 pm

Local 3D firm develops printer-based curriculum | Indianapolis Business Journal
New superfast Cloudio2go Iceman 3DDesktop Printer,Aluminium case,WiFi | Indiegogo

CubePro vs. Ultimaker 2 | Reddit
Taulman 618 Nylon 3D Printing Filament | Printed Solid
15-year-old boy to build low-cost 3D printer in India | digit.in
Deltaprintr: A new affordable 3D printer developed by a US college | digit.in
How This French 3-D Printing Company Differentiates Itself From the Competition | Motley Fool
French Man Has Developed a 3D Metal Printer for Just 600€: Capable of printing. | 3DPrint.com
Automated Home Manufacturing Combining 3D Printing With Robotics | Hackaday · James Hobson
Paper 3D printing | 3D Printing Today
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri Jun 06, 2014 5:06 pm

Virginia Tech introducing latest 3D printing vending machine DreamVendor 2 | 3Ders.org
DYNAMISM ANNOUNCES THE LAUNCH OF THE ULTIMAKER 2, THE NEWEST TECHNOLOGY ... | GISuser.com (press release)
Stratasys Dimension 1200es ABS Prototype 3D Printer | ENGINEERING.com
MakerBot Opens First Mini-retail Offering in New York's B&H SuperStore | 3DPrint.com
Dream Vendor: Interactive 3D Printing Machine | Gadgetify.com
DreamVendor's 3D Printing Kiosks to be Available in the Near Future | The Voice of 3D Printing
STRATASYS Fortus 400mc Barcelona 3D printed UAV | DIY Drones
Isis3D Announces Improved Isis One | 3D Printer World

The Titan 1 3D Printer | fabbaloo.com

WIP
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri Jun 06, 2014 5:10 pm

New Matter aims to make 3D printing more accessible with the MOD-t | 3dprintingplan.com
The MakrToolbox Mk1 – Inexpensive 3D Printer Kit | 3D Printer World

Klic-N-Print 3D printer | KNK USA
Combining 3D Printing with Robtic Arms | 3D Printing Forum - 3D Print Board
Affordable precision 3D printing for pros | kurzweilai.net
Structured Polymers Raises $1.2 million to Expand 3D Printing Materials Market | 3D Printing Forum - 3D Print Board
3D Printed Earbuds Compact | Instructables
This Titan 1 3D Printer Can Make Towering Objects in Half the Time | Inhabitat
Creating a 3D printer for under $100 | Bits & Pieces from the Embedded Design World - WordPress.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri Jun 06, 2014 5:11 pm

New SLA 3D Printer Kickstarter Campaign | Mold3D
French Man Developed 3D Metal Printer for Just 600 | freerepublic.com

Botfeeder 3d Printer Filament 1st Year Anniversary | ez-robot.com
eirdest Things We'd Want To Make With A 3D Printer | 93.1 Jack FM · Nadia Noir
Selectism Printing Things | Selectism · Lena Dystant
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri Jun 06, 2014 5:13 pm

Turning A Laser Cutter Into A 3D Printer With OpenSLS | Hackaday · Brian Benchoff
Up close with Zeus, the first consumer all-in-one 3D printer, scanner and fax | Gizmag
XYZPrinting's da Vinci 1.0 AiO and 2.1 AiO ALL-IN-ONE 3d Printers & Scanners Will Be | 3DPrint.com
XYZprinting launch two new printers with in-built 3D Scanning | Personalize
LulzBot TAZ 4 3D Printer Now Available For $2195 (video) | Geeky gadgets
Looking Glass Hologram Volumetric Printing Service Hits Kickstarter (video) | Geeky gadgets
Stratasys launches multi-material 3D printer | The Star Online
OpenSLS – An Open Source Project Creates a Sub-$15K Selective Laser Sintering r | 3DPrint.com
Tinkerine launches its own line of biodegradable PLA 3D printing filament | Biobased Digest
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri Jun 06, 2014 5:14 pm

Stratasys 3D Printed Injection Molds Help Company Cut Lead Times | Product Design & Development
Texas-Based 3DP Materials Startup Raises $1.5M | ENGINEERING.com
Sony unveils ultrathin Xperia T3 smartphone | htxt.africa
Materialise to Implement 3-matic STL for Additive Manufacturing in the Altair Partner Alliance | MarketWatch
XYZprinting announces da Vinci Nobel 1.0 SLA 3D printer, priced under $2500 | 3Ders.org
xt-copolyester | ColorFabb
Why Buying a 3D Printer Sucks | THRE3D
DirectJet 1024UVHS Texture 3D Printing | Signwarehouse.com
0
User avatar
dukejazz 
 

Re: New 3d Machine Unveilings

Postby dukejazz » Fri Jun 06, 2014 5:15 pm

New Ultra-Fast 3D Printer Set to Launch on Kickstarter | 3D Printer · Travis Starnes
"Affordable 3D Printers"? | Yahoo Answers
3d Printing Pen | Longecity
3D Printer Filament Production Line | RobotDigg
CubeX & CubePro 3D Printer | CDG
CreoPop, World's First Stereolithography 3D Printing Pen to Launch Indiegogo Campaign This Month | 3DPrint.com
XYZprinting broadens its 3D printer lineup with an SLA machine and 2 scanner hybrids | GigaOM

"Scan me": handheld 3D scanner and 3D printers at Computex 2014 | CNET
3D Printer Manufacturer, Builder, Announces New Color Mixing Feature | 3DPrint.com
Low-Cost Hardware Merchant Monoprice Now Offers A $1199 3D Printer | TechCrunch
PrintM3 3D Printer Launches On Indiegogo For $199 (video) | Geeky gadgets
ColorFabb Releases BronzeFill – Metal Filament, Along with GlowFill – Glow-in-the-dark Filament | 3DPrint.com
1
User avatar
dukejazz 
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

Next


 

Return to SketchUp for 3D Printing

Who is online

Users browsing this forum: No registered users and 1 guest

Visit our sponsors: