[Plugin][$] FredoCorner - v2.4a - 28 May 21

Re: [Plugin] FredoCorner - v1.8a - 26 Apr 20

Postby fredo6 » Sun Apr 26, 2020 4:53 pm

NEW RELEASE: FredoCorner v1.8a - 26 Apr 20

Requirement: LibFredo6 9.1b

FredoCorner 1.8a is a major release
  • Disabled the possibility to round new corners in the same session. When corners are generated, you have the option to modify the parameters ('Apply Change') or to Exit (Double-Click).
  • Correction for the Bevel tool at triangulated corners. Bevel are now made of a single face, possibly triangulated, except when the bordering faces do not have the same material.

    FredoCorner - Bevel simplify.png

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
3
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.8a - 26 Apr 20

Postby Einstein » Wed Apr 29, 2020 11:38 pm

Thank you so much! I needed this change a lot :D
Your fantastic tools are like air to me.
0

Einstein 
 

Re: [Plugin] FredoCorner - v1.8a - 26 Apr 20

Postby comsasa » Mon May 25, 2020 2:12 pm

FredoCorner v1.8a & LibFredo6 v10.5a User.

I want the edge color to appear as the sketchup default.

At the moment of using the Fredocorner brown, magenta, red and violet materials appear in the material window.

I don't want this to appear. What should I do?
0

comsasa 
 

Re: [Plugin] FredoCorner - v1.8a - 26 Apr 20

Postby Dave R » Thu May 28, 2020 7:06 pm

comsasa wrote:I don't want this to appear. What should I do?


First show an example of what you are seeing.

What version of SketchUp are you using. Your profile says "2019 Free/Make" but there is no such version.
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: [Plugin] FredoCorner - v1.8b - 28 May 20

Postby fredo6 » Thu May 28, 2020 9:27 pm

NEW RELEASE: FredoCorner v1.8b - 28 May 20

Requirement: LibFredo6 9.1b

FredoCorner 1.8b is a maintenance release fixing an issue with improper coloring of edges

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.8a - 26 Apr 20

Postby fredo6 » Thu May 28, 2020 9:29 pm

comsasa wrote:I want the edge color to appear as the sketchup default.

At the moment of using the Fredocorner brown, magenta, red and violet materials appear in the material window.

I don't want this to appear. What should I do?

Sorry for that. I use colors for debugging purpose and apparently I left them in the published version.

This is fixed in FredoCorner v1.8b

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.9a - 19 Jun 20

Postby fredo6 » Fri Jun 19, 2020 7:47 am

NEW RELEASE: FredoCorner v1.9a - 19 Jun 20

Requirement: LibFredo6 10.7a

FredoCorner 1.9a is a maintenance release
  • fixing an issue with reselection of edges after a Repair - Edit
  • Exit via a single click

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.9a - 19 Jun 20

Postby sehuz » Wed Aug 12, 2020 12:08 am

Hello. Great job with this amazing tool Fredo !
I'v just installed today and test it with the direct link for Twinmotion, sadly the beveling doesn't appear, and also it shows issues on the geometry.
But exporting the model to Twinmotion it works great.
0

sehuz 
 

Re: [Plugin] FredoCorner - v1.9a - 19 Jun 20

Postby fredo6 » Fri Aug 14, 2020 6:27 pm

What is this "direct link for Twinmotion"?

Did you generate the geometry or just activate the Preview mode (whihc is just drawing, not generating geometry)?
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v2.0a - 19 Aug 20

Postby fredo6 » Wed Aug 19, 2020 9:44 pm

NEW RELEASE: FredoCorner v2.0a - 19 Aug 20

Requirement: LibFredo6 11.0a

FredoCorner 2.0a is a maintenance release
  • Improvement of Orbit/Pan on Windows for Preview mode
  • Extension of validity

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
3
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v2.0a - 19 Aug 20

Postby rv1974 » Wed Sep 30, 2020 8:37 am

Fredo, could you make the offset faces stay selected after command is executed please? Just like you did in JPP. It'd help tremendously to do some nice things with this separated selection.
P.S. You are one step :) from making long awaited Groove maker. All it takes is to add is to add 'ignore hard\open edges' option* in pre-selected geometry and integrate merge coplanar offset faces and JPP inwards.

*- In his video, Ahmed solves this ignoring problem by drawing initial groove lines on separate tag.
0

rv1974 
 

Re: [Plugin] FredoCorner - v2.0a - 19 Aug 20

Postby pilou » Wed Sep 30, 2020 2:31 pm

Or you have another trick ;)
Make 2 same volumes at the same place !
Fractalize one then Exploded View it
you have your grooves! :mrgreen:

0
Frenchy Pilou
Is beautiful that please without concept!
Speedy Galerie
User avatar
pilou 
Top SketchUcator
 

Re: [Plugin] FredoCorner - v2.0a - 19 Aug 20

Postby vbbartlett » Wed Nov 11, 2020 5:27 am

I have a file that breaks, I am attaching it in hopes that you can use it to improve the plugin, which is awesome btw. It is a tooth of a gear. I have removed the rest of the gear as it is just too many verts.
0

vbbartlett 
 

Re: [Plugin] FredoCorner - v2.0a - 19 Aug 20

Postby fredo6 » Fri Nov 13, 2020 8:48 pm

I think you should first eliminate the very small edge to make it work.

Currently the limitation is that the offset should be smaller that the shortest edge in the selection. This is true for RoundCorner and FredoCorner.

FredoCorner - small edges.png
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v2.1a - 19 Nov 20

Postby fredo6 » Fri Nov 20, 2020 9:23 am

NEW RELEASE: FredoCorner v2.1a - 19 Nov 20

Requirement: LibFredo6 11.3a

FredoCorner 2.1a is a maintenance release
  • Bug fixing for Orbit/Pan on Windows for Preview mode
  • Extension of validity

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v2.1b - 02 Dec 20

Postby fredo6 » Wed Dec 02, 2020 10:12 pm

NEW RELEASE: FredoCorner v2.1b - 02 Dec 20

Requirement: LibFredo6 11.3a

FredoCorner 2.1b is a maintenance release
  • Prevent to set the number of segments to 0

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v2.2a - 06 Jan 21

Postby fredo6 » Wed Jan 06, 2021 9:03 am

NEW RELEASE: FredoCorner v2.2a - 06 Jan 21

Requirement: LibFredo6 11.3a

FredoCorner 2.2a is a maintenance release for extension of validity

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby fredo6 » Wed Jan 27, 2021 8:38 am

NEW RELEASE: FredoCorner v2.2a - 06 Jan 21

Requirement: LibFredo6 11.6a
Requirement: Sketchuchucation ExtensionStore 4.0.0.e

FredoCorner v2.3a becomes a paid plugin.

There is a Free trial period of 15 days from activation, with full features. Then, you need to license the extension on Sketchucation:
  • Perpetual License (3 seats): 22 €
  • Rush License (21 days from purchase date, 3 seats): 7 €
See this post for instructions to license an extension on Sketchucation.

Note: the previous version v2.2a will naturally expires on 31 Jan 21


-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby HarryR » Fri Feb 05, 2021 4:11 pm

I would love to buy the [Plugin][$] FredoCorner - v2.3a - 27 Jan 21. However, I am completely lost in where to go to purchase it. Could you please put a link to click that will bring me to the purchase page. I reckon it would have a massive impact on your sales because most people do not have time to follow the hints to where it might be. Brilliant plugin, but please help me to buy it!
1

HarryR 
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby fredo6 » Sun Feb 07, 2021 2:38 pm

HarryR wrote:I would love to buy the [Plugin][$] FredoCorner - v2.3a - 27 Jan 21. However, I am completely lost in where to go to purchase it. Could you please put a link to click that will bring me to the purchase page. I reckon it would have a massive impact on your sales because most people do not have time to follow the hints to where it might be. Brilliant plugin, but please help me to buy it!

Just download and install FredoCorner normally (along with LibFredo6 v11.6).

You get a free trial period of 15 days.

If you wish to license it (before or at expiration of free trial period), go to the menu of FredoCorner, which is at Tools > Fredo6 Collection > FredoCorner > License....
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby jweaver100 » Thu Feb 11, 2021 3:18 pm

Is FredoCorner free for as long as you are happy to keep updating it? Or is the trial period 15 days and after that, you have to buy it?

I am an occasional user and have just encountered an unexpected problem and its been suggested that this is because I havn't bought it.. And if thats the case I accept that..

But I just want to check that this is the case, as I only use it a couple of times per year, and for me its just not cost effective to buy.
1

jweaver100 
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby fredo6 » Thu Feb 11, 2021 4:02 pm

jweaver100 wrote:Is FredoCorner free for as long as you are happy to keep updating it? Or is the trial period 15 days and after that, you have to buy it?

The license is to use the extension. After expiration of the free trial period, you need to buy one if you wish to continue using the extension.

jweaver100 wrote:I am an occasional user and have just encountered an unexpected problem and its been suggested that this is because I havn't bought it.. And if thats the case I accept that..

The problem of preselection has nothing to do with the license. FredoCorner would either work or not.

I suggest you open the Ruby console before launching FredoCorner to see if there are error messages.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby jweaver100 » Thu Feb 11, 2021 5:58 pm

fredo6 wrote:I suggest you open the Ruby console before launching FredoCorner to see if there are error messages.


Cheers. I see this

Error: #<NoMethodError: undefined method `machine_id' for G6B:Module>
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1720:in `tem_context'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_fredocorner/fredocornertool.rbe:751:in `activate'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_fredocorner/fredocornertool.rbe:194:in `select_tool'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_fredocorner/fredocornertool.rbe:194:in `launch'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_fredocorner/fredocornertool.rbe:176:in `action__mapping'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:129:in `call'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:129:in `launch_action'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:227:in `launch_action'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_fredocorner/bootstrap_fredocorner.rbe:103:in `launch_action'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_fredocorner/bootstrap_fredocorner.rbe:118:in `block in startup'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1347:in `call'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1347:in `command_invoke'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6plugin.rbe:1328:in `block (2 levels) in build_config_commands'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1377:in `call'
c:/users/jonpw/appdata/roaming/sketchup/sketchup 2018/sketchup/plugins/fredo6_!libfredo6/lib6traductor.rbe:1377:in `block in add_command'
SketchUp:1:in `call'

But as I am out of the evaluation period, its not fair to ask for support... I would have no problem buying FredoCorner if I used it enough.. But I don't and its just not worth it for me..

Edit: Turned out to be a bigger issue.. Other Fredotools (i.e Fredospine) also not working.. It turns out it was a rogue instance of Sketchup which was running in the background.. Killed the tasks from the taskmanager and now its working again.
0

jweaver100 
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby jweaver100 » Thu Feb 11, 2021 10:52 pm

Now that I have realised that my time with FredoCorner is limited, I need to "evaluate" it to see if there is any functionality that I can find to justify buying it.

One of the things I have always wondered is whether its possible to do an unsymetrical corner?

By this, I mean longer on one axis, than another..

Here is a simulation of what I am trying to explain.




Is this possible?
0

jweaver100 
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby Dave R » Thu Feb 11, 2021 11:42 pm

jweaver100 wrote:One of the things I have always wondered is whether its possible to do an unsymetrical corner?

By this, I mean longer on one axis, than another..


Your picture didn't upload.

Like this?
Screenshot - 2_11_2021 , 4_40_29 PM.png


Yes. It's possible.
Screenshot - 2_11_2021 , 4_39_09 PM.png
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby jweaver100 » Fri Feb 12, 2021 1:32 am

Dave R wrote:
jweaver100 wrote:One of the things I have always wondered is whether its possible to do an unsymetrical corner?

By this, I mean longer on one axis, than another..


Your picture didn't upload.

Like this?
Screenshot - 2_11_2021 , 4_40_29 PM.png


Yes. It's possible.
Screenshot - 2_11_2021 , 4_39_09 PM.png


Yes.. EXACTLY that.. How? I have pressed every button I can find, and its always symetrical (i.e the Offset is the same on both axis..
0

jweaver100 
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby Dave R » Fri Feb 12, 2021 1:44 am

Start the tool and set the initial offset and then click on the green lines that need to get a different offset. Then type that offset. It'll show in the Measurements window.

Go to the first post of this thread and watch the videos.
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby jweaver100 » Fri Feb 12, 2021 1:55 am

Dave R wrote:Start the tool and set the initial offset and then click on the green lines that need to get a different offset. Then type that offset. It'll show in the Measurements window.

Go to the first post of this thread and watch the videos.


I am such a d***.. I got to this point many times.. And when I clicked on the green line it says "Select other Offset Lines or enter a new offset in the VCB"... And I expected a popup to come up, like it does when you set the "normal" offset.

I didn't realise that you just have to type.

Makes perfect sense now.. Never even thought to try that before now...

Thanks!
0

jweaver100 
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby kelly13 » Fri Feb 19, 2021 12:49 pm

I am from Russia, I do not always understand complicated instructions in English. Explain with simple sentences: "come here, click here .." HOW TO BUY A PLUG-IN LICENSE FOR 3 COMPUTERS

I do not need a premium plan for this site "sketchucation.com"
I just want to buy a license plagin fredocorner for $ 22

please duplicate the answer to my mail: tysha1231@yandex.ru

I will translate your answers on google translator
0
User avatar
kelly13 
 

Re: [Plugin][$] FredoCorner - v2.3a - 27 Jan 21

Postby fredo6 » Fri Feb 19, 2021 7:15 pm

In the main post about Sketchucation License, there is a link to a PDF explaining the whole process (in English).

If you have been able to post here in this forum, it means you are already registered on Sketchucation (and I assume you know how to do it, so you can explain it in Russian).

For the license of FredoCorner,

1 - In Sketchup just go to menu Tools > Fredo6 Collection > FredoCorner > License...

2 - In the Licensing dialog box, click on the 'Obtain License Button'.

3 - You are redirected to Sketchucation.com to purchase the license

4 - Once done, you receive an email with the purchased license file attached. Save it on your computer in a safe place.

5 - To activate the license, go to the same licensing dialog and click on 'Validate License'

6 - Browse and select the purchased license file which was sent to you by email.

7 - This is done.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

PreviousNext


 

Return to Plugins

Who is online

Users browsing this forum: babysharkvn, Bing [Bot], Google Bot, meneses81, Musiman, spazziodesign, thaiismiranda, vhince08 and 16 guests