[Plugin] FredoCorner - v1.7c - 21 Dec 19

Re: [Plugin] FredoCorner - v1.6c - 20 Jun 19

Postby deaneau » Mon Aug 19, 2019 11:15 am

Hi Fredo Round Corner have some errors

this is a corner with 8 segments and 1mm radius

skp 2019
https://1drv.ms/u/s!AoU3tpJxqmvto3skG47 ... P?e=nu42nx

skp2013
https://1drv.ms/u/s!AoU3tpJxqmvto3z6vD8 ... c?e=eIjFlT


0
MADE, BORN AND LIVING IN BERLIN
Big Thank You to all Programmers
Some German words are so long that they have a perspective. M.Twain
User avatar
deaneau 
 

Re: [Plugin] FredoCorner - v1.6c - 20 Jun 19

Postby Frederik » Mon Aug 19, 2019 1:43 pm

Looking at the various errors you've posted recently, I assume that it's more a limitation of SU rather than a bug in the various plugins...

What usually helps is if you scale the model up - i.e. 10 times so one millimetre becomes one centimetre...
And once the plugins have made the job for you, you scale it down to the original size...

The detail you seem to want to accomplish is not something SU is good at...
0
Cheers
Kim Frederik
User avatar
Frederik 
Thea Render Support
Thea Render Support
 

Re: [Plugin] FredoCorner - v1.6c - 20 Jun 19

Postby Pixero » Mon Aug 19, 2019 3:08 pm

I usually make it a component then copy the component and scale it up 10-1000 times and make the tiny stuff on that copy. When done I just delete the copy and the original component is done.
1
User avatar
Pixero 
 

Re: [Plugin] FredoCorner - v1.7a - 20 Sep 19

Postby fredo6 » Fri Sep 20, 2019 6:34 pm

NEW RELEASE: FredoCorner v1.7a - 20 Sep 19

Requirement: LibFredo6 9.1b

FredoCorner 1.7a extends validity.

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.7a - 20 Sep 19

Postby mrkidd » Thu Oct 03, 2019 4:45 pm

I am not able to get this to load in SU 2019...error message every time.
0

mrkidd 
 

Re: [Plugin] FredoCorner - v1.7a - 20 Sep 19

Postby Dave R » Thu Oct 03, 2019 6:29 pm

mrkidd wrote:error message every time.


What's the error message?

Did you install the current version of LibFredo6 which is required by FredoCorner? See Fredo's post immediately before yours.
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: [Plugin] FredoCorner - v1.7b - 02 Nov 19

Postby fredo6 » Sat Nov 02, 2019 9:50 am

NEW RELEASE: FredoCorner v1.7b - 02 Nov 19

Requirement: LibFredo6 9.1b

FredoCorner 1.7b for bug fixing.

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.7b - 02 Nov 19

Postby gmintz1 » Wed Nov 20, 2019 4:56 pm

I was excited to use this plugin but after installing and restarting sketchup I got an error message stating there was an error loading, could not find loader file. Help!

Yes, I installed the "lib" file.
Error message:
Error Loading File Fredo6_FredoCorner/__loader__FredoCorner
Could not find included file 'Fredo6_FredoCorner/__loader__FredoCorner'
0
Last edited by gmintz1 on Wed Nov 20, 2019 6:32 pm, edited 1 time in total.

gmintz1 
 

Re: [Plugin] FredoCorner - v1.7b - 02 Nov 19

Postby Dave R » Wed Nov 20, 2019 5:01 pm

What was the exact error message? Did you also install the required LibFredo6 files?

Screenshot - 11_20_2019 , 10_01_59 AM.png


Screenshot - 11_20_2019 , 10_02_30 AM.png
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: [Plugin] FredoCorner - v1.7c - 21 Dec 19

Postby fredo6 » Sat Dec 21, 2019 5:05 pm

NEW RELEASE: FredoCorner v1.7c - 21 Dec 19

Requirement: LibFredo6 9.1b

FredoCorner 1.7c for extenson of validity.

-----------------------------------------

Please note that, in the current version of FredoCorner:
- there are issues with some shortcut modifiers (Ctrl, Alt) on Mac)
- there are known issues and bugs here and there. This concerns in particular Collisions, i.e. when the offset is too large.
- Terminal corners (that is ending on a single edge) may present issues and bugs
- No documentation yet, so watch the videos that I will publish.

Please report issues, questions and any feedback in the present thread

-----------------------------------------

Home Page of FredoCorner for information and Download.

Main post of this FredoCorner thread.
1
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.7c - 21 Dec 19

Postby nlipovac » Sun Jan 12, 2020 11:07 am

Hi Fredo,
I get this message when using bevel (same for Round) when selecting three edges.
Is this tool limit so it just can´t do or I am doing something wrong here?

Also,
Thank You very much for all the plugins you have created and made my work easier doing so.
0

nlipovac 
Premium Member
Premium Member
 

Re: [Plugin] FredoCorner - v1.7c - 21 Dec 19

Postby fredo6 » Sun Jan 12, 2020 5:08 pm

This seems to be a limitation of FredoCorner. I can reproduce it on my computer.

The message is not informative, because, when there is a problem in the geometry, FredoCorner assumes that it could come from an offset which is too large. I know where the error happens, but this seems to be an issue in the heart of the algorithm, which is quite complex for this type of geometry. So I put your model in the stack of models I have already for when I'll dig into FredoCorner deep core to see how to make it more robust.

At a first glance, I am scratching my head on what could be the correct result with a selection of only 3 edges at this 6-edge corner, convex / concave.

It works fine however if you select the 6 edges.

FredoCorner Chair 6 - selection.png


FredoCorner Chair 6 - geometry.png
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

FredoCorner Jan 16, 2012

Postby mikedub » Thu Jan 16, 2020 10:52 pm

HI, today I just installed latest FredoCorner 1.7c and the Library 9.5c (Fredo6_!LibFredo6) folder and ruby files in the proper location – User > Library > Application Support > SketchUp > Plugins.

The Extension Manager says they are installed and active. And I see it in the Sketchup menu. But (after making a cube and selecting it, to test) when I click on the FredoCorner menu icon, or choose it from the menu, nothing happens. The FredoCorner menu does not come up at all.

I tried uninstalling and reinstalling the plugins, quitting and restarting Sketchup a few times. Still nothing.

Please help!

Cheers,
Mike
0

mikedub 
 

Re: FredoCorner Jan 16, 2012

Postby fredo6 » Fri Jan 17, 2020 8:35 am

mikedub wrote:But (after making a cube and selecting it, to test) when I click on the FredoCorner menu icon, or choose it from the menu, nothing happens. The FredoCorner menu does not come up at all.

Could you open the Ruby console to see if there are errors displayed.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.7c - 21 Dec 19

Postby Mim86 » Sun Feb 09, 2020 9:50 pm

This is fabulous, I have been going nuts trying to fudge fillets on my models. Now I can do it easily. I have added the extension, although it is telling me I need LibFredo6 9.1b. Which I can't find anywhere. Thanks in advance for any help here.

Mim
0
User avatar
Mim86 
 

Re: [Plugin] FredoCorner - v1.7c - 21 Dec 19

Postby fredo6 » Sun Feb 09, 2020 10:13 pm

Mim86 wrote:...although it is telling me I need LibFredo6 9.1b.

Just take the latest version of LibFredo6, currently v9.5g.

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoCorner - v1.7c - 21 Dec 19

Postby FlygFartyg » Mon Feb 10, 2020 9:55 am

Cant open sketchup when this is in the folder. It crashes Sketchup as soon as i start it. When i remove FredoCorner from the extensions folder Sketchup is able to run again. Wierd
0

FlygFartyg 
 

Re: [Plugin] FredoCorner - v1.7c - 21 Dec 19

Postby nebin asharaf » Sat Feb 15, 2020 2:18 pm

I Donno why it's showing this comment, its not a group, nor a component...
Any one can help?
0

nebin asharaf 
 

Re: [Plugin] FredoCorner - v1.7c - 21 Dec 19

Postby nebin asharaf » Sat Feb 15, 2020 3:26 pm

Yes its done

Its rectified.

"EDGE PROF. FILTER " WAS NOT SELECTED
0

nebin asharaf 
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

Previous


 

Return to Plugins

Who is online

Users browsing this forum: dulmkh, HoepkenMarc, pierodf and 11 guests

Visit our sponsors: