Medeek Wall Plugin

Re: Medeek Wall Plugin

Postby medeek » Fri Jan 10, 2020 10:34 am

As I was comparing the window and door modules this evening a number of things jumped out at me. I've made some updates over the last few months to the window module that did not get propagated to the door module. Here is a short list of items I will work on in the next couple of days to bring the door module up to par:

1.) Arched, gothic arch and half round door openings and doors.
2.) Variable king stud width for doors
3.) Variable trimmer stud width for doors
4.) Built up headers for doors
5.) Trimmer extend option for doors (for built up headers that have a bottom plate, common construction method in Alberta CANADA).

Note that these updates are specifically for man doors and do not apply to garage doors or garage door openings. That will be work for another day.

*** IMPORTANT***
I'm also considering making the wall plugin able to insert windows, doors and garage doors into generic walls (non-Medeek Walls), similar to what one is able to do with the electrical plugin. I actually don't think this will be too difficult and will make the Window/Door tools more universal and flexible for the user who may or may not always use Medeek walls in a given project.
3
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Mon Jan 13, 2020 7:59 am

1 thru 5 of the items list previously are complete and now functional (not released yet).

First look at an arched doorway:



I now need to complete the door trim, casing and install modules for an arched door. Eventually I will provide the option for all of the various door types (eg. six panel, half glass etc…) however to start with I will just enable the solid arched door.

There will also be the permutation involving sidelites and double sidelites with arched doors, but again this will be work for another day.
1
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Tue Jan 14, 2020 2:43 am

You can set the framing mode of the plugin to 2D or “no framing” 3D mode on a wall panel basis or even set the default behavior in the global settings.

Once you are comfortable with your design you can switch the wall panels to the full framing mode. The no framing mode generates the wall framing as a single solid. Perhaps I need another tutorial that explains this in further detail. Switching between modes is completely automated, just one mouse click after you right click on the wall assembly(s).



The idea behind the 2D and 3D No Framing modes is to keep the model as lightweight as possible during the early design phases (ie. don’t over complicate things with framing) while at the same time providing enough information to fully understand the design and its dimensional constraints/properties.

The 2D mode is great for the initial layout but eventually one of the 3D modes will be required to fully grasp the various wall heights and possibly stacked window layouts etc…
4
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Wed Jan 15, 2020 6:03 pm

First look at an arched door frame and (solid) door:



I think the only thing still pending is to make sure that wainscoting module can handle arched doors and then I will make this upgrade live.
3
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Thu Jan 16, 2020 5:26 am

Version 1.2.0  - 01.15.2019

- Added (segmental and half round) arched doors to the door module.
- Enabled variable king stud and trimmer stud widths for doors.
- Enabled built-up headers for doors.
- Enabled the trimmer extend option for doors.
- Added casing "Style C" for rectangle and arched doors (gypsum wrap for interior wall openings).







I've also addressed a few minor bugs and issues with both the door and window modules.

Currently the only arched door style is a "solid" door however I can add additional styles upon request (ie. half glass, double, full glass, six panel etc...)
2
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Thu Jan 16, 2020 5:34 am

1
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Fri Jan 17, 2020 2:40 am

Version 1.2.0b - 01.16.2020
- Fixed a bug with wall presets introduced with the addition of the stud spacing offset parameter.

*** CRITICAL BUG FIX ***
If you have previously installed Version 1.1.8 thru Version 1.2.0 then you will want to update your installation to this latest version. The bug was introduced into the wall presets module on 01/06/2020 when the stud spacing offset parameter was added. This bug fix should resolve that bug and allow the creation of wall presets with this latest parameter added to the list of wall parameters.
1
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Fri Jan 17, 2020 8:15 am

Version 1.2.1 - 01.17.2020
- Added FLUSH:MITER and MITER:FLUSH option to the Wall Cladding Corners parameter.
- Fixed a second bug with wall presets introduced with the addition of the stud spacing offset parameter.



The additional options for the Wall Cladding Corners parameter is specifically for situations where you encounter a wall cladding material/thickness change at an inside corner as shown.
1
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Fri Jan 17, 2020 1:30 pm

Version 1.2.1b - 01.17.2020
- Added (segmental and half round) arched double doors to the door module.



View model here:

https://3dwarehouse.sketchup.com/model/ ... Solid-Door
2
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby Glenn at home » Fri Jan 17, 2020 2:56 pm

Looking good Nathan!
1
SketchUp Pro 2019/2020
Dell Precision 3630
Intel i7-8700
32 GB Ram
512 M.2 PCIe SSD
Nvidia RTX 2080

Glenn at home 
 

Re: Medeek Wall Plugin

Postby medeek » Fri Jan 17, 2020 5:26 pm

I've been considering add an advanced option for Quoins (outside corners only):



The required parameters would probably be:

Style:
Length 1:
Length 2:
Height:
Spacing:
Thickness:
Material:

View model here:

https://3dwarehouse.sketchup.com/model/ ... 863/Quoins
2
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Sat Jan 18, 2020 7:12 am

Version 1.2.1c - 01.17.2020
- Fixed a number of bugs related to stacked doors, door sidelites and backward compatibility with previous versions.
- Added (segmental and half round) arched half glass doors to the door module.



Half glass option per customer request.
1
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Sun Jan 19, 2020 12:57 am

Version 1.2.1d - 01.18.2020
- Fixed the praire and perimeter grille style for arched half glass and full glass doors.
- Added (segmental and half round) arched full glass doors to the door module.



It seems like there is always more with doors. The items still needing attention with the door module are:

- Option for transom window above rectangular and arched doors.
- Sidelites for arched doors.
- Additional door types for arched doors (ie. six panel, double half glass, double full glass etc...)
- Sliding doors
- Pocket doors
- Closet bi-fold doors

View model here:
https://3dwarehouse.sketchup.com/model/ ... lass-Doors
3
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby juju » Sun Jan 19, 2020 6:09 pm

medeek wrote:I've been considering add an advanced option for Quoins (outside corners only)

Keep the main thing the main thing.
1
Save the Earth, it's the only planet with chocolate.
User avatar
juju 
Premium Member
Premium Member
 

Re: Medeek Wall Plugin

Postby medeek » Sun Jan 19, 2020 11:51 pm

juju wrote:
medeek wrote:I've been considering add an advanced option for Quoins (outside corners only)

Keep the main thing the main thing.


It would actually be just another type of corner trim.
0
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Sat Jan 25, 2020 1:30 pm

Version 1.2.2 - 01.25.2020

- Added (segmental and half round) arched half glass double doors to the door module.
- Added (segmental and half round) arched full glass double doors to the door module.







1
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Thu Jan 30, 2020 8:33 am

Version 1.2.3 - 01.30.2020
- Enabled up to four king and/or four trimmer studs for windows.
- Enabled up to four king and/or four trimmer studs for doors.
- Enabled up to four king and/or four trimmer studs for garage doors.







Eight studs deep may seem a bit excessive but it's there if you need it.
3
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Fri Feb 07, 2020 9:21 pm

Version 1.2.4 - 02.07.2020
- Fixed a bug with the gypsum wrap for rectangular and arched door openings of interior walls.

2
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Sun Feb 09, 2020 7:42 am

Version 1.2.4b - 02.08.2020
- Added a T1-11 built-in material into the material library.
- Fixed the move wall tool so that it no longer requires a negative number for offsetting to the exterior side of the wall.
- Enabled the display of the offset dimension next to the blue movement arrow for the move wall tool.



The elimination of the negative offset should make the wall move tool a lot more intuitive to use. Please feel free to give me further feedback in this regard.
2
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Thu Feb 13, 2020 2:29 am

In some cases you may frame up something like this:



Rather than a tee intersection you have two walls forming a corner and then a third wall tying in at the corner. Currently I really don't have a good solution for this scenario since one would probably need to offset the sheathing or gypsum back where the tertiary wall ties in.

I will need to give this some further thought. Any ideas or suggestions are always welcome.

I've identified a possible bug or issue where the top plate cutout algorithm tries to cut out a zero thickness slice from the adjacent top plate in this particular scenario, I will release a fix for that shortly.
0
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

Re: Medeek Wall Plugin

Postby medeek » Sun Feb 16, 2020 7:57 am

Version 1.2.5 - 02.15.2020
- Enabled custom materials (Material Library) for all doors and windows: Trim, Casing, Door Frame, Door, Window Frame, Shutters.
- Addressed a minor bug with multiple walls coming together at a corner.




*** IMPORTANT WARNING ***

This latest update is a necessary and major rewrite of the window and door modules. As such, this update will break compatibility with previous versions of the Wall plugin. It is highly suggested not to upgrade to this latest version for existing projects that were created with previous versions of the plugin.
1
Nathaniel P. Wilkerson PE
Medeek Engineering Inc
design.medeek.com
User avatar
medeek 
PluginStore Author
PluginStore Author
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

Previous


 

Return to Plugins

Who is online

Users browsing this forum: dulmkh, pierodf and 8 guests

Visit our sponsors: