[Plugin] GKWare Cabinet Maker

Can i use cabmaker & cutmaster for modular furniture cutlist

Postby srimadiraju » Sun Mar 14, 2021 5:54 pm

Hello Gary,

Can i use cabmaker v6 & Cutmaster for modular furniture (kitchens&wardrobes) cutlist purpose to produce cut sizes, edge banding details, holes for mini fixes & groves to work on machines?

Iam planning to purchase if it works for me.....


Awaiting for your reply
Thaks & Regards
Sri
0

srimadiraju 
 

Re: [Plugin] GKWare Cabinet Maker

Postby Garry K » Tue Mar 16, 2021 4:54 am

Yes it should - I can talk to you over Skype.
My Skype handle is:
gkernan@telus.net
0

Garry K 
Premium Member
Premium Member
 

Re: [Plugin] GKWare Cabinet Maker

Postby Antonis777 » Thu Apr 08, 2021 12:54 pm

After i click this the user id window disappears and Sketchup freezes as if it was somewhere a hidden window or task and needed to be closed first. I can't even close Sketchup I do it from task manager
0

Antonis777 
 

Re: [Plugin] GKWare Cabinet Maker

Postby Garry K » Thu Apr 08, 2021 3:50 pm

Please email me from my website and provide me with your userid
0

Garry K 
Premium Member
Premium Member
 

Re: [Plugin] GKWare Cabinet Maker

Postby shaunperkins » Sun Apr 25, 2021 4:05 am

hi
im trying to make several cabinets that are tall open shelf cabinets (ends,tops, bottoms and backs) out of door material, so i can get it to come up as components on m export,
is this at all possible?
0

shaunperkins 
 

Re: [Plugin] GKWare Cabinet Maker

Postby Garry K » Mon Apr 26, 2021 2:35 pm

CabMaker allows you to add finished panels to sides and back.
You can configure the cabinet to have no bottom and then add another cabinet with depth of 0 so that you can have another door set up as a bottom. When you edit the main cabinet the new bottom door cabinet will NOT be edited - you will have to edit the bottom door (cabinet) indpendently.
1

Garry K 
Premium Member
Premium Member
 

Re: [Plugin] GKWare Cabinet Maker

Postby mitch8628 » Thu May 13, 2021 3:52 am

Hello Garry,

I submitted a purchase for CabMaker Build I think 2 days ago, and emailed you my user name. Just checking to see what to expect for time frame for getting the plugin active with my user name.

Thanks!

Mitch
0

mitch8628 
 

Re: [Plugin] GKWare Cabinet Maker

Postby mitch8628 » Thu May 13, 2021 5:05 pm

Thanks to Garry for getting back to me quickly through email! Looking forward to diving deeper into the plug-in for our kitchen design!
0

mitch8628 
 

Re: [Plugin] GKWare Cabinet Maker

Postby NancyL » Sun Nov 28, 2021 12:56 am

I've really enjoyed working with cabmaker and cutmaster and I'm getting close to wanting to take my DFX files to the local CNC place.

I'm hung up on the drawer and hinge systems and how to set them up in the two programs. It seems there are a few demo ones set up in the DB, but not what I want to use. further I'm not finding any useful information about adding the data for the system I DO want to use in either help file.

Has anyone else sorted out how to add a new drawer slide system? I'm specifically interested in the BLUM Tandem full slides.
0

NancyL 
 

Re: [Plugin] GKWare Cabinet Maker

Postby cullisz » Fri Dec 03, 2021 1:39 pm

I just purchased the plugin and was wondering if it's possible to make Farm Sink style sink cabinets. I searched this forum for previous posts relating to this and also checked YouTube but couldn't find anything.

Thanks.
0

cullisz 
 

Re: [Plugin] GKWare Cabinet Maker

Postby Garry K » Fri Dec 03, 2021 4:33 pm

Yes you can. You need to adjust the cabinet - set the top drawer so that it does not create a drawer and does not create the drawer front.
1

Garry K 
Premium Member
Premium Member
 

Pullout Slide Adjust not working

Postby blah1234567890 » Thu Dec 23, 2021 12:22 am

How can I get cabmaker to user my pullout slide adjust measurements. I only need a 1/2" on each side of the pull out for the drawer slide. No mater where I change the slide adj it always defaults to 1". I am on the trial and have adjusted no settings. Its confusing because its listed in multiple areas. Which on is it.

This is what's in the system and even if I make changes nothing happens).
Rules 2:
Pullout Slide Adj: Default - 2" (When changed nothing happens. Yet when I make it its 1" on each side, not 2".)

Drawers:
Pullout Options:
Pullout Row: 1
Slide Adj: Default 0" (When I change nothing happens.)

If I change both at the same time nothing also happens. Its always 1" on both sides of the pullout.
0

blah1234567890 
 

Re: [Plugin] GKWare Cabinet Maker

Postby Garry K » Thu Dec 23, 2021 3:51 am

sounds like your tabs are locked.
Go to PROJECT tab and turn off locks
1

Garry K 
Premium Member
Premium Member
 

Re: [Plugin] GKWare Cabinet Maker

Postby nakinaw » Mon Jan 03, 2022 5:42 am

Hey Gary.

Curious how you animate doors in Cabmaker? I turned the animation on, but how do you toggle the doors open/closed?

Steve
0

nakinaw 
 

Re: [Plugin] GKWare Cabinet Maker

Postby Garry K » Mon Jan 03, 2022 5:03 pm

You must have Dynamic Components loaded
Then choose SU / tools / Interact
0

Garry K 
Premium Member
Premium Member
 

Re: [Plugin] GKWare Cabinet Maker

Postby MFC83 » Mon Jan 03, 2022 5:10 pm

Does anyone know how to edit the cabinet style to have a "Plant On" back? Meaning the cabinet back is the full width and height of the cabinet box and the sides and bottom are butt jointed to it. For example https://imgur.com/a/XnkNK39
0

MFC83 
 

Re: [Plugin] GKWare Cabinet Maker

Postby Garry K » Mon Jan 03, 2022 6:32 pm

Set the dado to be >= the thickness of the sides
0

Garry K 
Premium Member
Premium Member
 

Re: [Plugin] GKWare Cabinet Maker

Postby MFC83 » Mon Jan 03, 2022 7:51 pm

Excellent! Thanks for the quick response and solution!
0

MFC83 
 

Re: [Plugin] GKWare Cabinet Maker

Postby Distinctive Woodwork » Thu Jan 06, 2022 6:20 pm

Hi Garry,

I found your plugin on sketchup, and tried to use it. I have run into error -25. I got a couple hours into using the extension and like what i have seen. I am serious about purchasing this extension, as it would be to great help in my drafting for clients! I have sent you an email with all my information. Let me know how we can proceed!
0

Distinctive Woodwork 
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

Previous


 

Return to Plugins

Who is online

Users browsing this forum: ArayaCAD, fekkokaste, FiraTroopa, Gili, Google Bot, imamzw, puchurcio, SAMUEL EDUAR and 11 guests