[Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby peerapat » Thu Dec 03, 2020 8:56 am

Thanks Fredo
0

peerapat 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby rv1974 » Thu Dec 03, 2020 9:11 am

>>
I guess that main problem is that plugin doesn't really know which direction is prefered one,. maybe we could assume the red 'U' direction..
Second problem ThruPaint tries very hard to make texturing continues.. As far as I have seen Your desired result it has breakes on every bend of tube.. So I guess You want some mix of 'quad' abd 'natural uv' modes.. Just select and paint each segment separately with 'natural uv'.. As You did I guess..

But somehow it does know the preferred dimension when applying "Quad" UV". Plus, tools like Profile Builder manage to apply UVs correctly when generating new geometry. Indeed, essentially I'm asking is a hybrid of quad + natural modes. I think it's the most preferred mode for architects. It'd be nice to hear from Fredo if this hybrid mode is theoretically possible.

>>
Just select and paint each segment separately with 'natural uv'.. As You did I guess

Right, manual clicking segment by segment is the current solution, but in many cases it's too laborious..
0

rv1974 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby kevvv » Sat Dec 26, 2020 7:41 pm

where can i get this?
0

kevvv 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby Dave R » Sun Dec 27, 2020 12:33 am

kevvv wrote:where can i get this?


If you look at the first post in this thread you will see it's part of FredoTools and the link for it.

By the way, your profile says you are using SketchUp 2019 Free/Make but that's impossible. Please update your profile with the correct version.
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby kingfisher13 » Mon Jan 18, 2021 4:44 am

I don't know what is going on, but Thrupaint is giving me so many issues right now. Its frustrating me to the point where I don't even want to use Sketchup anymore. I created a geometrically perfect onion dome, made of ENTIRELY quads, with no issues or errors in the construction.

When I try to use the Quad UV wrap to wrap a mosaic tile texture around the dome, it gives me errors every time. I get the yellow errors, and I get red errors, where it says the faces don't have 3 or 4 vertices, when they all do. I've been unable to texture this thrice d**ned dome because of it. Its ruining my project, and I really don't want to have to export the dome to 3ds Max to wrap the texture, because then it will need to be triangulated, which will completely mess it up when I import it back into Sketchup.

Does anyone have a solution for this stupid bug I keep experiencing?
0

kingfisher13 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby Dave R » Mon Jan 18, 2021 1:54 pm

kingfisher13 wrote:Does anyone have a solution for this stupid bug I keep experiencing?


What version of SketchUp are you using? What operating system? That information is important. Please complete your profile.

If you share your SketchUp model file so we can see exactly what you have, we can give you some guidance.
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby fredo6 » Mon Jan 18, 2021 3:06 pm

kingfisher13 wrote:When I try to use the Quad UV wrap to wrap a mosaic tile texture around the dome, it gives me errors every time. I get the yellow errors, and I get red errors, where it says the faces don't have 3 or 4 vertices, when they all do. I've been unable to texture this thrice d**ned dome because of it.

A dome is typically not suitable for QuadUV. QuadUV is for a grid, with rows and columns, where it is possible for ThruPaint to follow the shape.
Now, it would be useful to have your model [or part of it] to advise on what you could do for texturing.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby bsfranza » Wed Mar 17, 2021 8:07 am

hi there,

is it possible to turn off that sound when "picking" materials from the scene?

i have looked inside the pluginfolder if maybe i find a sound file that i coud just delete :)?

best, franz
0

bsfranza 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby fredo6 » Wed Mar 17, 2021 8:51 am

bsfranza wrote:i have looked inside the pluginfolder if maybe i find a sound file that i coud just delete :)?

The file is in folder Fredo6_!LibFredo6/IMAGES_Standard, with name Camera_click.wav.

If you rename it or remove it, it should not play the sound.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby Einstein » Fri Apr 16, 2021 5:42 pm

Hi,
I think it would be cool to have one more selection option - all selected groups. With it we could paint all selected groups through with a single click (even if they had materials applied to faces), possibly without changing their UVs.
What do you think about this idea?
0

Einstein 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby williamhhf » Fri Jun 04, 2021 10:34 am

hi there, i can't download it, just showed blank pop up window after click download
0

williamhhf 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby rv1974 » Thu Jun 17, 2021 9:17 am

How do I activate material sampler and UV mode without icon? Is there dedicated modifier key? Thanks
0

rv1974 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby fredo6 » Thu Jun 17, 2021 12:09 pm

For the sampler; press or toggle Shift.

For the UV Mode, I guess you mean Natural, Projected and QuadMesh. There is no shortcut for that currently.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby rv1974 » Sun Jun 20, 2021 5:57 am

I meant the eyedropper with red cross.
But here is another thing that irritates me in many cases. PT's Natural mode skews\rotates\distorts textures on some faces ( see left cylinder in attached pic) whereas regular Paint bucket does the job perfectly. I wanted to stop using the standard PB in favor of Fredo's PT but this glitch won't allow it. Is there a trick to get a logical result with Natural mode from the first click?
0

rv1974 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby rv1974 » Tue Jun 22, 2021 7:45 am

I must be doing something wrong but it looks like natural mode is broken. In most cases some faces are always distorted. Could it just mimic standard paint tool in equivocal situations?
0

rv1974 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby darbybuckley1111 » Mon Jul 12, 2021 11:11 pm

When installing I receive the error "unable to unziped archived file" I've tried everything (even on different computers) - any ideas on how to download this plugin??
0

darbybuckley1111 
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby fredo6 » Tue Jul 13, 2021 11:10 am

There seems to be problem with the publishing of FredoTools on the Sketchucation Store.

I will republish this afternoon.

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Plugin] FredoTools::ThruPaint - v1.3a - 20 Oct 16

Postby Rich O Brien » Tue Jul 13, 2021 1:28 pm

If you are experiencing Unzip Error in the ExtensionStore try clearing the Edge Cache
0
There's a frontroom and a backroom....reverse faces
User avatar
Rich O Brien 
Administrator
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

Previous


 

Return to Plugins

Who is online

Users browsing this forum: andritas, bayu97, BayuHaikalRizie, fredo6, marupatrono, SP3873, thanhhuynh190183 and 19 guests

Visit our sponsors: