Dynamic Components

Dynamic Components

Postby jojo2803 » Mon Jul 04, 2022 1:07 pm

Hi
Could you help me how to solve my issue with dynamic components permanent indent? When I'm changing cabinet depth the indent is moving. The indent always should be 16 mm from back edge.
0

jojo2803 
 

Re: Dynamic Components

Postby Dave R » Mon Jul 04, 2022 3:18 pm

Resizing with Dynamic Components is a scaling operation. In your model you need to split the front part of the panel off the back as separate components. Then resize the back part and only move the front part with the groove. Maybe something like this.
Screenshot - 7_4_2022 , 9_17_02 AM.png


I made it look like a single piece on the right by hiding the seam lines.
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: Dynamic Components

Postby jojo2803 » Thu Jul 07, 2022 9:40 am

Dave R wrote:Resizing with Dynamic Components is a scaling operation. In your model you need to split the front part of the panel off the back as separate components. Then resize the back part and only move the front part with the groove. Maybe something like this.
Screenshot - 7_4_2022 , 9_17_02 AM.png


I made it look like a single piece on the right by hiding the seam lines.




Thank you Dave for your tips. I did it but when I use OpenCut List plugin it shows me as two components. I want to have boths components to be as one part.Do you have an idea how to solve this issue?
0

jojo2803 
 

Re: Dynamic Components

Postby Dave R » Thu Jul 07, 2022 12:32 pm

Explode the two components and make a single one of the geometry before running Open Cutlist. Or skip the idea of making the cabinet a dynamic component.
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

Re: Dynamic Components

Postby samodelkin_77 » Thu Jul 07, 2022 2:03 pm

Open cutlist does not understand the details with or without a groove. You will have to take this point into account yourself in the cutting.
0

samodelkin_77 
 

Re: Dynamic Components

Postby Dave R » Thu Jul 07, 2022 2:25 pm

samodelkin_77 wrote:Open cutlist does not understand the details with or without a groove.


Good point. Maybe the groove isn't necessary and could just as easily be omitted. I made a dynamic drawer box component specifically for use with Blum undermount drawer glides. It has no joinery details so in a cutlist the parts report correctly. It's also set up so a report can be generated for the drawer box maker to quote prices. They price by the numbers in the gray fields.
Screenshot - 7_7_2022 , 8_24_26 AM.png
0
Etaoin Shrdlu


%

(THERE'S NO PLACE LIKE)

G28 X0.0 Y0.0 Z0.0

M30

%
User avatar
Dave R 
Global Moderator
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 



 

Return to Dynamic Components

Who is online

Users browsing this forum: No registered users and 1 guest