by CadFather » Sat Feb 11, 2012 12:57 pm
Hi Anton and Thank You - this is a really great plugin is there a way that i could chain a few of those commands? say i press F12 and sketchup goes full screen + no controls + no status bar + no scene bar.. etc?
-

CadFather
- PluginStore Author

-
- Posts: 1032
- Joined: Fri Nov 16, 2007 11:03 am
- Location: London, Milano, Sicily
- Name: CadFather
- Operating system: Windows
- SketchUp version: 2014
- License type: Pro
- SketchUp use: landscape architecture
- Level of SketchUp: Advanced
-
by Anton_S » Mon Feb 13, 2012 5:21 am
CadFather wrote:is there a way that i could chain a few of those commands? say i press F12 and sketchup goes full screen + no controls + no status bar + no scene bar.. etc?
Well, rightnow threre isn't, but I'm planing to add two new command items to "window/settings". One will be "chain multiple" and the other "set multiple". The "chain multiple" will open a dialog box with a checkbox for each command ("full screen", "controll bar(s)", "status bar"...). The "set multiple" command item will show/hide the items that are checked in the dialog box. Like if "full screen" and "status bar" is checked, the "set multiple" command will toggle sketchup between "full screen" and show/hide "status bar". I already started doing that, but not having knowledge in html, javascript, css, and other will slow down the release of new version.
-
Anton_S
- PluginStore Author

-
- Posts: 1204
- Joined: Tue Nov 23, 2010 9:15 pm
- Name: Anton
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by CadFather » Mon Feb 13, 2012 5:29 pm
sounds perfect Anton..looking forward to it..
-

CadFather
- PluginStore Author

-
- Posts: 1032
- Joined: Fri Nov 16, 2007 11:03 am
- Location: London, Milano, Sicily
- Name: CadFather
- Operating system: Windows
- SketchUp version: 2014
- License type: Pro
- SketchUp use: landscape architecture
- Level of SketchUp: Advanced
-
by pololo » Fri Feb 24, 2012 6:46 am
For win7 64bits .... please!! 
-
pololo
-
- Posts: 31
- Joined: Tue Jun 08, 2010 10:03 pm
- Name: Jhon Pep
by thomthom » Fri Feb 24, 2012 9:38 am
pololo wrote:For win7 64bits .... please!! 
What do you mean by this? It should work as is. Nothing special about Win7 64bit. Do you get errors or anything when you try to use/load/install it?
-

thomthom
- PluginStore Author

-
- Posts: 19478
- Joined: Tue Nov 13, 2007 12:47 pm
- Location: Trondheim, Norway
- Name: Thomas Thomassen
- Operating system: Windows
- SketchUp version: 2019
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by Rich O Brien » Fri Feb 24, 2012 10:23 am
pololo wrote:For win7 64bits .... please!! 
It works on Win7
There's a frontroom and a backroom....reverse faces
-

Rich O Brien
- Administrator
-
- Posts: 12683
- Joined: Fri Oct 31, 2008 9:05 am
- Location: Broadford, Clare, Ireland
- Name: Rich O'Brien
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
-
by pololo » Fri Feb 24, 2012 10:26 am
thomthom wrote:pololo wrote:For win7 64bits .... please!! 
What do you mean by this? It should work as is. Nothing special about Win7 64bit. Do you get errors or anything when you try to use/load/install it?
Hi Thom!! Doesn´t work on win 7 64 bits, not even in the plugins menu. Dont load in my win7. Has anyone tested it on windows 7 64 bits? I use Sketchup 8/win64 bits
Last edited by pololo on Fri Feb 24, 2012 10:32 am, edited 1 time in total.
-
pololo
-
- Posts: 31
- Joined: Tue Jun 08, 2010 10:03 pm
- Name: Jhon Pep
by Rich O Brien » Fri Feb 24, 2012 10:29 am
It's in Windows > Settings
There's a frontroom and a backroom....reverse faces
-

Rich O Brien
- Administrator
-
- Posts: 12683
- Joined: Fri Oct 31, 2008 9:05 am
- Location: Broadford, Clare, Ireland
- Name: Rich O'Brien
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
-
by thomthom » Fri Feb 24, 2012 10:39 am
Menu Location.png It's worth re-reading the plugin description if you experience problems. (I modified the text colour to a darker grey as it was rather invisible with light grey on white background... )
-

thomthom
- PluginStore Author

-
- Posts: 19478
- Joined: Tue Nov 13, 2007 12:47 pm
- Location: Trondheim, Norway
- Name: Thomas Thomassen
- Operating system: Windows
- SketchUp version: 2019
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by pololo » Fri Feb 24, 2012 10:44 am
Thanks Thom, Rich!! I appreciate your help, thank you very much!!! 
-
pololo
-
- Posts: 31
- Joined: Tue Jun 08, 2010 10:03 pm
- Name: Jhon Pep
by newrui » Mon Feb 27, 2012 10:52 pm
Hi Anton, is it possible to make this work with Macs? Perhaps use Lion's full screen feature? SU is desperately in need of window/toolbar management under Macs... Thanks!
-
newrui
-
- Posts: 4
- Joined: Mon Jan 30, 2012 6:48 pm
- Name: Ray
by Anton_S » Tue Feb 28, 2012 4:57 am
newrui wrote:Hi Anton, is it possible to make this work with Macs? Perhaps use Lion's full screen feature? SU is desperately in need of window/toolbar management under Macs... Thanks!
Hello Newrui, Mac is a tottaly different library. Its way of using and its features are tottaly different from Windows API. Truly, I, myself never experienced Mac OS, nor its library, and I don't have it. I'm sorry, I can't write one for Macs, though, there are a bunch of users outhere that are  and I think these could get their hands or heads on keyboard and write one for Mac. 
-
Anton_S
- PluginStore Author

-
- Posts: 1204
- Joined: Tue Nov 23, 2010 9:15 pm
- Name: Anton
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by newrui » Tue Feb 28, 2012 6:42 pm
Anton_S wrote:newrui wrote:Hi Anton, is it possible to make this work with Macs? Perhaps use Lion's full screen feature? SU is desperately in need of window/toolbar management under Macs... Thanks!
Hello Newrui, Mac is a tottaly different library. Its way of using and its features are tottaly different from Windows API. Truly, I, myself never experienced Mac OS, nor its library, and I don't have it. I'm sorry, I can't write one for Macs, though, there are a bunch of users outhere that are  and I think these could get their hands or heads on keyboard and write one for Mac. 
Thanks Anton, I hope so too, fingers crossed!
-
newrui
-
- Posts: 4
- Joined: Mon Jan 30, 2012 6:48 pm
- Name: Ray
by Anton_S » Tue Feb 28, 2012 8:22 pm
newrui wrote:I hope so too, fingers crossed!
No doubt 
-
Anton_S
- PluginStore Author

-
- Posts: 1204
- Joined: Tue Nov 23, 2010 9:15 pm
- Name: Anton
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by halroach » Wed Mar 14, 2012 7:08 am
Finally Kiosk Mode for Sketchup! Lovely! Works great on Sketchup 8 pro Win7 x64...
-

halroach
-
- Posts: 500
- Joined: Sat Mar 29, 2008 1:12 pm
- Name: Yoni Frandzel
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by halroach » Wed Mar 14, 2012 7:15 am
You can render with Vray in full screen now! Just have to bind a keyboard shortcut for the now hidden render button... or detach the vray toolbar.
Nice Work Anton!
-

halroach
-
- Posts: 500
- Joined: Sat Mar 29, 2008 1:12 pm
- Name: Yoni Frandzel
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by Anton_S » Wed Mar 14, 2012 11:50 pm
Halroach wrote:You can render with Vray in full screen now! Just have to bind a keyboard shortcut for the now hidden render button... or detach the vray toolbar.
Nice Work Anton!
Thankyou, didn't thought that this plugin would be that useful.. Yesssss!!! 
-
Anton_S
- PluginStore Author

-
- Posts: 1204
- Joined: Tue Nov 23, 2010 9:15 pm
- Name: Anton
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by g_wilson » Sat May 12, 2012 12:08 am
Thank you for this. At last I can use 8.5 x 14 legal size paper in printer and get an aspect ratio that comes closer to filling that paper size. Just turn off 4 total control bars + scene bar + status bar.
-
g_wilson
- Premium Member

-
- Posts: 37
- Joined: Sun Jan 04, 2009 9:22 pm
- Location: near Vancouver BC
- Name: g_wilson
- Operating system: Windows
- SketchUp version: 2013
- License type: Free/Make
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Intermediate
by Anton_S » Tue Jun 19, 2012 12:26 am
Updated Monday June 18, 2012See First Post 
-
Anton_S
- PluginStore Author

-
- Posts: 1204
- Joined: Tue Nov 23, 2010 9:15 pm
- Name: Anton
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by Rich O Brien » Tue Jun 19, 2012 12:28 am
Thanks Anton. I love this plugin 
There's a frontroom and a backroom....reverse faces
-

Rich O Brien
- Administrator
-
- Posts: 12683
- Joined: Fri Oct 31, 2008 9:05 am
- Location: Broadford, Clare, Ireland
- Name: Rich O'Brien
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
-
by Anton_S » Tue Jun 19, 2012 12:33 am
Rich O Brien wrote:Thanks Anton. I love this plugin 
That was fast 
-
Anton_S
- PluginStore Author

-
- Posts: 1204
- Joined: Tue Nov 23, 2010 9:15 pm
- Name: Anton
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by Rich O Brien » Tue Jun 19, 2012 12:49 am
Well, this is my most used part of SketchUp. Now the ability to have my default layout under one shortcut is insane.
Kudos
There's a frontroom and a backroom....reverse faces
-

Rich O Brien
- Administrator
-
- Posts: 12683
- Joined: Fri Oct 31, 2008 9:05 am
- Location: Broadford, Clare, Ireland
- Name: Rich O'Brien
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
-
by delzkii » Tue Jul 10, 2012 3:00 pm
thanks for sharing! working on my windows 7 64 bit. 
-
delzkii
-
- Posts: 1
- Joined: Mon Mar 14, 2011 7:42 am
- Name: Rodel Llamelo
by davinchi » Fri Jul 27, 2012 10:26 am
Hello, it seems to be a very nice plugin!!! Is it possible to get an step by step installation manual of this plugin for Win7 x 64; SU Pro 8.0.3117??? I try to install, but without success, please help! Thanks a lot!
-
davinchi
-
- Posts: 1
- Joined: Wed Apr 28, 2010 6:35 pm
- Name: davinchi
by charly2008 » Fri Jul 27, 2012 12:29 pm
Thanks Anton for this, good useful tool. I've always been waiting for such a tool. I have no problem in Win 64-bit and Sketchup 8
One reminder: The change in full-screen mode to another application is done with the Windows and Tab key.
Last edited by charly2008 on Fri Jul 27, 2012 10:06 pm, edited 1 time in total.
He who makes no mistakes, makes nothing
-

charly2008
-
- Posts: 1253
- Joined: Wed Apr 08, 2009 12:03 pm
- Name: KHA
- Operating system: Windows
- SketchUp version: 8
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by Anton_S » Fri Jul 27, 2012 9:18 pm
davinchi wrote:Is it possible to get an step by step installation manual of this plugin for Win7 x 64; SU Pro 8.0.3117??? I try to install, but without success, please help! Thanks a lot!
Download it and extract it to plugins It should look like this: .../Google Sketchup [n]/plugins/win32 windows forwardable.rb Window Settings.rb
-
Anton_S
- PluginStore Author

-
- Posts: 1204
- Joined: Tue Nov 23, 2010 9:15 pm
- Name: Anton
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by feodos » Tue Aug 28, 2012 7:13 am
After assigning a hotkey for the menu item "Thread Dialogs" problem. Menu crumbles
-
feodos
-
- Posts: 10
- Joined: Fri Jun 05, 2009 9:22 am
- Name: feodos
by Anton_S » Thu Aug 30, 2012 9:25 pm
feodos wrote:After assigning a hotkey for the menu item "Thread Dialogs" problem. Menu crumbles
Thanks for report, I'll try to fix that.
-
Anton_S
- PluginStore Author

-
- Posts: 1204
- Joined: Tue Nov 23, 2010 9:15 pm
- Name: Anton
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: hobby
- Level of SketchUp: Advanced
by tulacong » Fri Aug 31, 2012 3:40 am
 tha  thank you
-
tulacong
-
- Posts: 45
- Joined: Mon Aug 04, 2008 9:29 pm
by Ad Machine » 5 minutes ago
-
Ad Machine
- Robot
-
- Posts: 2012
-
Return to Plugins
|