 by Rich O Brien » Fri Apr 15, 2011 10:02 pm
Sorry for the delay I got lost in the woods.... Here's the next challenge - Camping
The rules: - 30 minutes maximum modeling time - Unlimited preparation time for thinking, sketching, researching but NOT FOR MODELING - Community will vote for favorite submission at competition end - Multiple entries are allowed - Please provide a Wireframe, an Untextured and a Textured image of your model (800x600) - SketchUp output only - Please be considerate to members with slower connections when submitting images (800x600) - Any texturing should be done within the 30 minutes - As enthusiastic as some of you are about rendering, kindly refrain from posting any renderings in the gallery as they could solicit votes, remember this is about modeling, not rendering - Have fun! Competition closes on April 30th 2011 - 6:00 PM GMT There's a frontroom and a backroom....reverse faces
-
Rich O Brien
- Administrator
-
- Posts: 12683
- Joined: Fri Oct 31, 2008 9:05 am
- Location: Broadford, Clare, Ireland
- Name: Rich O'Brien
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
-
by Gaieus » Sat Apr 16, 2011 6:53 am
-
Gaieus
-
- Posts: 27379
- Joined: Sat Oct 20, 2007 8:24 am
- Location: Pécs, Hungary
- Name: Csaba Pozsárkó
- Operating system: Windows
- SketchUp version: 2013
- License type: Pro
- SketchUp use: historical reconstruction
- Level of SketchUp: Advanced
-
by mukul.ar » Sat Apr 16, 2011 1:14 pm
I'll start things off on this one...  Had been waiting for the new challenge... Hopefully do better on this one... Basic modelling finished in around 25 mins.. Spent the rest in tweaking some things and deciding the colors...
-
mukul.ar
-
- Posts: 98
- Joined: Wed Jan 14, 2009 7:03 pm
- Name: Mukul
by modelhead » Sat Apr 16, 2011 4:41 pm
Great start!
-
modelhead
-
by VaporTrail » Mon Apr 18, 2011 1:26 pm
Well, I've finally decided to try my hand at this. Picked up 3d modeling less than a year ago, and finally got confident enough.
Anyway, here's my attempt. Did as much detail as I could and still bring it in under the wire. My forte seems to be detail, rather than speed though.
-
VaporTrail
-
- Posts: 6
- Joined: Thu Dec 23, 2010 12:21 am
by bupaje » Mon Apr 18, 2011 10:04 pm
I'm afraid this is the best I could manage in 30 minutes but important to participate. wireframe.jpg untextured.jpg colored.jpg
-
bupaje
-
- Posts: 132
- Joined: Sat Mar 26, 2011 8:09 pm
- Location: California
- Name: Burt
-
by boofredlay » Tue Apr 19, 2011 4:45 pm
10 min. max. I made it a face me component too 
-
boofredlay
- Global Moderator
-
- Posts: 9529
- Joined: Mon Oct 22, 2007 1:50 pm
- Location: Huntsville/Madison Alabama
- Name: Eric Lay
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by david_h » Tue Apr 19, 2011 4:50 pm
charming. . .  If I make it look easy. . .then it probably is.
-
david_h
- Top SketchUcator
-
- Posts: 2676
- Joined: Wed Nov 28, 2007 9:31 pm
- Location: Salt Lake City, UT
- Name: David_H
by SketchUpNoobie » Tue Apr 19, 2011 5:09 pm
David_H wrote:charming. . .
Agreed.  Share after the competition?  --
SketchUpNoobie: the complete noob in all things SketchUp.
-
SketchUpNoobie
-
- Posts: 524
- Joined: Thu May 06, 2010 4:00 pm
- Location: Charlotte, North Carolina
- Name: SketchupNoobie
- Operating system: Windows
- SketchUp version: 8
- License type: Free/Make
- SketchUp use: hobby
- Level of SketchUp: Beginner
by Rich O Brien » Tue Apr 19, 2011 5:15 pm
I can't tell the wood from the trees
There's a frontroom and a backroom....reverse faces
-
Rich O Brien
- Administrator
-
- Posts: 12683
- Joined: Fri Oct 31, 2008 9:05 am
- Location: Broadford, Clare, Ireland
- Name: Rich O'Brien
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
-
by david_h » Tue Apr 19, 2011 5:17 pm
This little guy Looks like he's waiting his turn as well.
If I make it look easy. . .then it probably is.
-
david_h
- Top SketchUcator
-
- Posts: 2676
- Joined: Wed Nov 28, 2007 9:31 pm
- Location: Salt Lake City, UT
- Name: David_H
by rocorona » Tue Apr 19, 2011 9:42 pm
Here my attempt... not detailed, but made "on the fly", and made out of my (poor) memory Only "pure" SketchUp, no plug-ins. Last edited by rocorona on Sat Apr 23, 2011 7:23 am, edited 1 time in total.
-
rocorona
-
- Posts: 19
- Joined: Mon Jan 11, 2010 10:42 am
- Name: Roberto
-
by mukul.ar » Wed Apr 20, 2011 5:26 am
I do not understand eric's entry... 
-
mukul.ar
-
- Posts: 98
- Joined: Wed Jan 14, 2009 7:03 pm
- Name: Mukul
by Gaieus » Wed Apr 20, 2011 7:27 am
mukul.ar wrote:I do not understand eric's entry...
Well, have you ever shat in he woods?
-
Gaieus
-
- Posts: 27379
- Joined: Sat Oct 20, 2007 8:24 am
- Location: Pécs, Hungary
- Name: Csaba Pozsárkó
- Operating system: Windows
- SketchUp version: 2013
- License type: Pro
- SketchUp use: historical reconstruction
- Level of SketchUp: Advanced
-
by mukul.ar » Wed Apr 20, 2011 10:35 am
great expression on the guy's face but his posture seems a bit weird if he is doin that...
-
mukul.ar
-
- Posts: 98
- Joined: Wed Jan 14, 2009 7:03 pm
- Name: Mukul
by Rich O Brien » Wed Apr 20, 2011 10:45 am
I thought he was 'pitching his tent' or getting aroused?
There's a frontroom and a backroom....reverse faces
-
Rich O Brien
- Administrator
-
- Posts: 12683
- Joined: Fri Oct 31, 2008 9:05 am
- Location: Broadford, Clare, Ireland
- Name: Rich O'Brien
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
-
by JBantha » Thu Apr 21, 2011 10:51 pm
Enter: JBantha! greet1 My very first post so far i can recall1 Anyway, my submission SketchUp 8, Bubble skin, line2cyl. I've never camping, so I've used inspiration from Camp Lazlo by the way, the 30 minutes challenge is a bit exciting! >w<
-
JBantha
-
- Posts: 3
- Joined: Thu Jan 15, 2009 9:23 pm
by dorfpunk » Sat Apr 23, 2011 9:54 pm
This is my third attampt to post this basically because I'm a bit stupid sometimes. Not totally happy with this result but as it gets colder in my little part of the world this is what I am thinking when I am thinking about camping... hammock wires.jpg hammock no texture.jpg hammock.jpg it's a beautiful night - you can almost see the stars
-
dorfpunk
-
- Posts: 50
- Joined: Fri Feb 12, 2010 7:22 am
- Name: dorfpunk
by bupaje » Mon Apr 25, 2011 2:28 am
Here's another try at the axe. Felt sure I could do better in 30 minutes but took most of that time just to do the head. I ended up making a quick cylinder and using the Shape Bender plugin to make a quick handle. Some weird faces on it but that's that. wire.jpg monochrome.jpg colored.jpg
-
bupaje
-
- Posts: 132
- Joined: Sat Mar 26, 2011 8:09 pm
- Location: California
- Name: Burt
-
by boofredlay » Tue Apr 26, 2011 3:02 pm
4 more days until this one ends. Hop to it campers!
-
boofredlay
- Global Moderator
-
- Posts: 9529
- Joined: Mon Oct 22, 2007 1:50 pm
- Location: Huntsville/Madison Alabama
- Name: Eric Lay
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by Rich O Brien » Tue Apr 26, 2011 11:38 pm
Couldn't resist...  Spork_SMC.png There's a frontroom and a backroom....reverse faces
-
Rich O Brien
- Administrator
-
- Posts: 12683
- Joined: Fri Oct 31, 2008 9:05 am
- Location: Broadford, Clare, Ireland
- Name: Rich O'Brien
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
-
by mukul.ar » Wed Apr 27, 2011 5:38 am
Nice one Rich..! Care to share the modelling technique for the curved part of the head of spatula?
@ Eric: Please could you share the modelling technique of your fish of the previous challenge....
-
mukul.ar
-
- Posts: 98
- Joined: Wed Jan 14, 2009 7:03 pm
- Name: Mukul
by bupaje » Wed Apr 27, 2011 5:45 am
Nicely done Rich. I'm amazed by the stuff in these challenges threads done in 30 minutes or under.
-
bupaje
-
- Posts: 132
- Joined: Sat Mar 26, 2011 8:09 pm
- Location: California
- Name: Burt
-
by SketchUpNoobie » Wed Apr 27, 2011 12:42 pm
mukul.ar wrote:@ Eric: Please could you share the modelling technique of your fish of the previous challenge....
Here's Boo's tutorial. --
SketchUpNoobie: the complete noob in all things SketchUp.
-
SketchUpNoobie
-
- Posts: 524
- Joined: Thu May 06, 2010 4:00 pm
- Location: Charlotte, North Carolina
- Name: SketchupNoobie
- Operating system: Windows
- SketchUp version: 8
- License type: Free/Make
- SketchUp use: hobby
- Level of SketchUp: Beginner
by boofredlay » Wed Apr 27, 2011 3:44 pm
SketchupNoobie wrote:mukul.ar wrote:@ Eric: Please could you share the modelling technique of your fish of the previous challenge....
Here's Boo's tutorial.
Yes indeed, thanks for posting the link John.
-
boofredlay
- Global Moderator
-
- Posts: 9529
- Joined: Mon Oct 22, 2007 1:50 pm
- Location: Huntsville/Madison Alabama
- Name: Eric Lay
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by mukul.ar » Wed Apr 27, 2011 5:59 pm
Thanks..!!
-
mukul.ar
-
- Posts: 98
- Joined: Wed Jan 14, 2009 7:03 pm
- Name: Mukul
by KarinaGM » Thu Apr 28, 2011 7:30 am
Nice entries! I wanted to participate in this one but I haven't found the time. I still have 2 days, so maybe I'll find 30 spare minutes.
"Aquel que sacrifica un poco de libertad por seguridad, no se merece ninguna y terminará perdiendo ambas"
-Benjamín Franklin.
-
KarinaGM
-
- Posts: 247
- Joined: Fri Feb 20, 2009 12:23 pm
- Location: Spain
- Name: Karina
by phopny » Fri Apr 29, 2011 4:04 am
I am glad to be here！ 
-
phopny
-
- Posts: 1
- Joined: Fri Apr 29, 2011 3:58 am
- Name: lily
by mukul.ar » Sun May 01, 2011 6:17 pm
When is the voting guys? This topic was supposed to be up by yesterday i believe??
-
mukul.ar
-
- Posts: 98
- Joined: Wed Jan 14, 2009 7:03 pm
- Name: Mukul
by Ad Machine » 5 minutes ago
-
Ad Machine
- Robot
-
- Posts: 2012
-
Return to Competitions
|
