by Didier Bur » Wed Nov 21, 2007 3:40 am
Hi, Here is an update of my extrudelinetool: - now supports numeric entries in the VCB - annoying beep supressed - some graphic enhancements. Enjoy, Please get the latest version from the PluginStore Download
-

Didier Bur
-
- Posts: 1349
- Joined: Wed Nov 14, 2007 10:07 pm
- Location: Nancy, France
- Name: Didier Bur
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by rv1974 » Wed Nov 21, 2007 3:41 am
Fantastic, thanks a lot. May be, to make it perfect, you could add: 1.non-orthogonal tracking, aka SU magenta line 2.forced direction (SHIFT catch) 3."from point" snapping- before final 2 clicks one could move cursor along desired direction->digital input via vcb->and finally last 2 clicks. But once again, I'm already happy with current version.
-
rv1974
-
- Posts: 1338
- Joined: Tue Nov 13, 2007 11:38 am
- Name: rv1974
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
by otb designworks » Wed Nov 21, 2007 3:41 am
Hi Didier.
I'm not trying to hijack this thread, but I have been unable to access your site for the last couple of days.
I am using safari and I keep getting a warning that the server is not responding.
Any idea what is up? Anyone else having this problem?
Cheers, Chuck OTB Designworks is on Youtube6 core nMP, 32 gig RAM, (2) D700 GPU's, dual monitors
-
otb designworks
-
- Posts: 676
- Joined: Mon Nov 12, 2007 3:13 pm
- Location: Whitefish, Montana
- Name: OTB Designworks
- Operating system: Mac
- SketchUp version: 2015
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by boofredlay » Wed Nov 21, 2007 3:42 am
FYI, I am using IE6 and I cannot access the site either.
-

boofredlay
- Global Moderator
-
- Posts: 9529
- Joined: Mon Oct 22, 2007 1:50 pm
- Location: Huntsville/Madison Alabama
- Name: Eric Lay
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by otb designworks » Wed Nov 21, 2007 3:42 am
weird, but thanks for the confirmation that it's not my red-headed stepchild Mac causing the issue.
Cheers, Chuck OTB Designworks is on Youtube6 core nMP, 32 gig RAM, (2) D700 GPU's, dual monitors
-
otb designworks
-
- Posts: 676
- Joined: Mon Nov 12, 2007 3:13 pm
- Location: Whitefish, Montana
- Name: OTB Designworks
- Operating system: Mac
- SketchUp version: 2015
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by boofredlay » Wed Nov 21, 2007 3:43 am
Hey, watch who you call a red-headed stepchild 
-

boofredlay
- Global Moderator
-
- Posts: 9529
- Joined: Mon Oct 22, 2007 1:50 pm
- Location: Huntsville/Madison Alabama
- Name: Eric Lay
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by otb designworks » Wed Nov 21, 2007 3:43 am
Cheers, Chuck OTB Designworks is on Youtube6 core nMP, 32 gig RAM, (2) D700 GPU's, dual monitors
-
otb designworks
-
- Posts: 676
- Joined: Mon Nov 12, 2007 3:13 pm
- Location: Whitefish, Montana
- Name: OTB Designworks
- Operating system: Mac
- SketchUp version: 2015
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by Gaieus » Wed Nov 21, 2007 3:44 am
In one of his posts here Didier said his site was down for maintenance (or what) and should be online about today or so...
-

Gaieus
-
- Posts: 27379
- Joined: Sat Oct 20, 2007 8:24 am
- Location: Pécs, Hungary
- Name: Csaba Pozsárkó
- Operating system: Windows
- SketchUp version: 2013
- License type: Pro
- SketchUp use: historical reconstruction
- Level of SketchUp: Advanced
-
by boofredlay » Wed Nov 21, 2007 3:44 am
Thanks for the update, sir. 
-

boofredlay
- Global Moderator
-
- Posts: 9529
- Joined: Mon Oct 22, 2007 1:50 pm
- Location: Huntsville/Madison Alabama
- Name: Eric Lay
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by Fletch » Thu Apr 10, 2008 4:49 am
Didier, thank you for this great script! I'm wondering ... Can you make it work like the follow-me tool so that you can pick the path before selecting the lines to extrude and they would follow that path? like this image: 
It would be great for creating low-poly roof flashing around a complex roof, or for low-poly sunshades with all those blades, so you don't have to make them with thickness, etc. here's a conversation for this a few months back
-
Fletch
- Twilight Render
-
- Posts: 732
- Joined: Wed Nov 14, 2007 1:02 am
- Location: Milwaukee, WI USA / Rovinj, Croatia
- Name: Fletch
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by plot-paris » Mon Jul 07, 2008 8:36 am
just a thought: It would be great to implement the ExtrudelineTool completely into SketchUp by making the push/pull tool work on selected lines. so the push/pull tool works as normal, but if some lines are selected beforehand, it works on these lines like your ExtrudelineTool. (however, I asume that ruby doesn't give you acces to the native SketchUp tools, right? therefore this idea should be in the wish list section  )
-

plot-paris
-
- Posts: 1562
- Joined: Tue Apr 01, 2008 10:15 am
- Location: Konstanz, Germany
- Name: plot-paris
- Operating system: Windows
- SketchUp version: 2016
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by bobu » Mon Jul 14, 2008 7:35 pm
Thanks for Updates, Sir! But I have an idea, hope your scripts have one more option. The follow me tool twisted the face along the 3d path, so can you fix it by make the line always parabel to a selected face? or more simple, the line always parabel to OXY or OXZ or OYZ of WorldXYZ. Thanks again and sorry about my terible English.
-
bobu
-
- Posts: 6
- Joined: Mon Jul 14, 2008 6:17 pm
by xrok1 » Sat Feb 07, 2009 1:12 am
is this most excellent tool still being developed? i'd like to see the path follow option implemented as well 
“There are three classes of people: those who see. Those who see when they are shown. Those who do not see.” http://www.Twilightrender.com try it!
-
xrok1
-
- Posts: 1966
- Joined: Sat Feb 16, 2008 1:53 am
- Location: Canada
- Name: Rocky
by thomthom » Wed May 27, 2009 9:51 pm
Any chance of having it select the new set of edges? Not the ones making up the extrusion, but the ones parallel to the original ones?
-

thomthom
- PluginStore Author

-
- Posts: 19334
- Joined: Tue Nov 13, 2007 12:47 pm
- Location: Trondheim, Norway
- Name: Thomas Thomassen
- Operating system: Windows
- SketchUp version: 2013
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by Didier Bur » Thu May 28, 2009 8:08 pm
Hi, Any chance of having it select the new set of edges?
What do you mean ? Sorry but I don't understand...
-

Didier Bur
-
- Posts: 1349
- Joined: Wed Nov 14, 2007 10:07 pm
- Location: Nancy, France
- Name: Didier Bur
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by thomthom » Thu May 28, 2009 8:26 pm
-

thomthom
- PluginStore Author

-
- Posts: 19334
- Joined: Tue Nov 13, 2007 12:47 pm
- Location: Trondheim, Norway
- Name: Thomas Thomassen
- Operating system: Windows
- SketchUp version: 2013
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by pilou » Thu May 28, 2009 10:43 pm
Funny I have asked the same 8 days ago  but my post remained alone DIDIER DIDIER DIDIER sur l'air des lampions 
-

pilou
- Top SketchUcator
-
- Posts: 19578
- Joined: Wed Jan 23, 2008 10:33 pm
- Name: Pilou
- Operating system: Windows
- SketchUp version: 2017
- License type: Free/Make
- SketchUp use: hobby
- Level of SketchUp: Advanced
-
by Didier Bur » Fri May 29, 2009 7:10 pm
Hi, Done. Just a matter of packaging now...
-

Didier Bur
-
- Posts: 1349
- Joined: Wed Nov 14, 2007 10:07 pm
- Location: Nancy, France
- Name: Didier Bur
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
-
by thomthom » Fri May 29, 2009 7:31 pm
 Excellent! Thanks!
-

thomthom
- PluginStore Author

-
- Posts: 19334
- Joined: Tue Nov 13, 2007 12:47 pm
- Location: Trondheim, Norway
- Name: Thomas Thomassen
- Operating system: Windows
- SketchUp version: 2013
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by pilou » Fri May 29, 2009 9:21 pm
That is a tricky tool very useful  Bravo!  Waiting the new update! And this will be a new hit!  Curious that don't yet exist 
-

pilou
- Top SketchUcator
-
- Posts: 19578
- Joined: Wed Jan 23, 2008 10:33 pm
- Name: Pilou
- Operating system: Windows
- SketchUp version: 2017
- License type: Free/Make
- SketchUp use: hobby
- Level of SketchUp: Advanced
-
by Ruturaj » Mon Jun 08, 2009 2:23 am
Hello Didier,
thanks for you share the " extrudelinetool " New update . its really nice
ThankS
RuturaJ
Thanks, RuturaJ
-
Ruturaj
-
- Posts: 49
- Joined: Mon Feb 16, 2009 1:32 pm
- Location: Kolhapur, India
- Name: Ruturaj Patil
-
by pilou » Mon Jun 15, 2009 9:51 pm
Done. Just a matter of packaging now...
The Didier "Pakaging" for the new update of the extrude line is ready?
-

pilou
- Top SketchUcator
-
- Posts: 19578
- Joined: Wed Jan 23, 2008 10:33 pm
- Name: Pilou
- Operating system: Windows
- SketchUp version: 2017
- License type: Free/Make
- SketchUp use: hobby
- Level of SketchUp: Advanced
-
by ken » Mon Jun 15, 2009 11:11 pm
Pilou wrote:Done. Just a matter of packaging now...
The Didier "Pakaging" for the new update of the extrude line is ready?
Well, I must be dense today, where is the newly package script? Again thanks Didier for all your scripts. Ken
Fight like your the third monkey on Noah's Ark gangway.
-

ken
- Premium Member

-
- Posts: 989
- Joined: Thu Nov 15, 2007 1:38 pm
- Location: Fort Mill, SC
- Name: Ken
- Operating system: Windows
- SketchUp version: 2017
- License type: Pro
- SketchUp use: engineering and mechanical design
- Level of SketchUp: Advanced
by pilou » Tue Jun 16, 2009 1:34 am
where is the newly package script?
I believe that Didier has forgotten to post it! 
-

pilou
- Top SketchUcator
-
- Posts: 19578
- Joined: Wed Jan 23, 2008 10:33 pm
- Name: Pilou
- Operating system: Windows
- SketchUp version: 2017
- License type: Free/Make
- SketchUp use: hobby
- Level of SketchUp: Advanced
-
by TIG » Mon Jun 22, 2009 5:48 pm
TIG
-

TIG
- Global Moderator
-
- Posts: 19915
- Joined: Mon Nov 12, 2007 7:24 pm
- Location: Northumbria UK
- Name: TIG
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
by thomthom » Tue Oct 27, 2009 4:13 pm
What has happened to Didier? He ok?
-

thomthom
- PluginStore Author

-
- Posts: 19334
- Joined: Tue Nov 13, 2007 12:47 pm
- Location: Trondheim, Norway
- Name: Thomas Thomassen
- Operating system: Windows
- SketchUp version: 2013
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by CadFather » Tue Oct 27, 2009 6:34 pm
hope so..it's been a while..
-

CadFather
- PluginStore Author

-
- Posts: 1030
- Joined: Fri Nov 16, 2007 11:03 am
- Location: London, Milano, Sicily
- Name: CadFather
- Operating system: Windows
- SketchUp version: 2014
- License type: Pro
- SketchUp use: landscape architecture
- Level of SketchUp: Advanced
-
by Rivo » Wed Nov 25, 2009 5:41 pm
Thanks a lot, it is just what I looking for. This tool can be updated? Sad it have no own button and can't select edges which will be extruded. Anyway this tool makes me happy=)
Sorry for my lame English =)
-
Rivo
-
- Posts: 1
- Joined: Sun Nov 22, 2009 5:39 pm
by TIG » Wed Nov 25, 2009 5:54 pm
An Extrude [Rails,Edges,Lathe etc] toolbar is in progress...
TIG
-

TIG
- Global Moderator
-
- Posts: 19915
- Joined: Mon Nov 12, 2007 7:24 pm
- Location: Northumbria UK
- Name: TIG
- Operating system: Windows
- SketchUp version: 2018
- License type: Pro
- SketchUp use: architecture
- Level of SketchUp: Advanced
by thomthom » Wed Nov 25, 2009 5:59 pm
TIG wrote:An Extrude [Rails,Edges,Lathe etc] toolbar is in progress...
Does the Extrude Edges select the new set of edges ready to be extruded again?
-

thomthom
- PluginStore Author

-
- Posts: 19334
- Joined: Tue Nov 13, 2007 12:47 pm
- Location: Trondheim, Norway
- Name: Thomas Thomassen
- Operating system: Windows
- SketchUp version: 2013
- License type: Pro
- SketchUp use: other
- Level of SketchUp: Advanced
-
by Ad Machine » 5 minutes ago
-
Ad Machine
- Robot
-
- Posts: 2012
-
Return to Plugins
|