[Plugin] RoundCorner - v3.2g - 01 Apr 18[Plugin] RoundCorner - v3.2g - 01 Apr 18From now on, the information on RoundCorner is maintained on the Plugin Home Page of RoundCorner. This is also where you can download the RBZ file.
Requirement: LibFredo6 v8.1 or above If you land on this page and are unfamiliar with how to install Sketchup Extensions such as LibFredo6 or how to register on Sketchucation, please watch this video or refer to the Plugin page of LibFredo6. RoundCorner performs the rounding of the edges and corners of 3D shapes along a 2D profile, in 3 modes: Round corners, Sharp corners and Bevel. RoundCorner also supports concave corners (always rendered as Round) and non-orthogonal edge faces. Corners can have 2, 3, or more edges. Last edited by fredo6 on Sun Apr 01, 2018 11:47 am, edited 107 times in total.
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09![]() ![]() I can't wait to try out this new version. Thomas Thomassen — SketchUp Monkey & Coding addict
List of my plugins and link to the CookieWare fund
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09Dear Fredo6:
this is getting to a point that it's getting hard to find new words to describe your work and what your doing for this comunity and sketchup itself...so i'll just have to say: THIS IS UNBELIEVABLE!!! THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU, THANK YOU. sorry for my lack of originality ![]() I'm feeling bad for not helping you with nothing since your plugins more than once have helped finishing my (personal or professional) projects, and you never ask nothing in return for this plugins, so if you need any help in any project of yours, (modeling, texturing , rendering etc), some tips, tricks, toturials, info on software or whatever or even just a good discussion, anything that i can help just tell me. i would gladly help you Sketchup should raise a statue to people like you or at least mentione guys like you for keeping sketchup alive and at leas just suport high poly since the plugins are getting more and more sofisticated (sorry my english) and the only things "pulling them down" it's sketchup itself with their own limits After all the plugins you released, and all for free (are you nuts?!?!) i don't know what more to do or say to show how gratefull i am. Again: thank you ![]() David Re: {Plugin] RoundCorner 2.0a - 9 Jul 09WOW!!
“There are three classes of people: those who see. Those who see when they are shown. Those who do not see.”
http://www.Twilightrender.com try it! Re: {Plugin] RoundCorner 2.0a - 9 Jul 09As always another tour de force...
The tools work very well... except the bevel/chamfer - which I suspect is the simplest of the three ? - which keeps bug-splatting me e.g. a 1m cube 100/150mm bevel to top or all edges... Sure it'll be a simple fix... TIG
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09Legend Fredo..... you don't know how much time you have saved me....
![]() ![]() purpose/expression/purpose/....
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09![]() Another masterpiece!!Works like a charm! Thank you very much! Elisei Last edited by ely862me on Sun Jul 12, 2009 9:37 am, edited 1 time in total.
Elisei (sketchupper)
____________________________________________________________ Before no life was done on Earth it was THE LIFE ITSELF...GOD Come and See EliseiDesign
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09If you came to Spain you are invited to take a "sangria", wine or whatever at the named "best natural beach" of the world: Cies Islands.
Thank you very much Re: {Plugin] RoundCorner 2.0a - 9 Jul 09.....the Master!
..and that's how sketchup became open source Thank You! ![]()
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09
That goes for Queensland, Australia..... your more than welcome here Fredo; I'll look after you like a King!!! purpose/expression/purpose/....
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09Looks stellar. Should help add a new level of realism to Sketchup Rendering. Nothing like a nice round corner to catch those specular highlights!
![]() Thank you kind sir!! 3D Artist at Clearstory 3D Imaging
Guide Tool at Winning With Sketchup Content Creator at Skapeup
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09It's great!
Thank you Fredo! I have to say your rich production and hardworking spirit affect me very much! -best wish from beijing su30
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09Rondement mené!
![]() Bravo! ![]() Works fine in the V6 Bug Splatt in the V7 ![]()
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09you are a genius FREDO sketchup would be a steaming pile of crap without you... amen
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09Oooh ... Excellent ruby! Thanks!
'Nobody knew health care could be so complicated.' -D. Trump
Re: {Plugin] RoundCorner 2.0a - 9 Jul 09
Pilou, Thanks. Could you be more explicit on the bug splat in v7. TIG has one too, but apparently only with Bevel. Do you see the Progress bar and then get a bugsplat, or does it happen right away when you execute? Fredo
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09Note: my bugsplats are with v7 and using bevel only, it does work perhaps 10% of tries, rest it splats immediately !
![]() TIG
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09As soon as I press enter for apply! Splafffffffffffff
![]() works one time and the second splafff ![]() with the 3 tools! so yet very instable (for me) ![]()
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09TIG, Pilou,
Does it happen with complex shapes, meaning those where the operation would take several seconds. I never got any Splat in my environments, so it is difficult for me to reproduce. But it maybe related to the way I make the operation interruptible. I guess that because you probably have fast machines, something happens in the first milliseconds of the operation. It may be specific to SU7, because precisely SU7 blocks the GUI while creating geometry. Thanks Fredo
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09Thank you so much Fredo. I had a quick test in SU 6 and it works very well.
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09
My splats occur with a very simple 1m cube with 100mm bevel, to top face or multi-edges. it usually splats, but when it works it's done almost instantaneously ! The other 2 types of rounding work fine - never splatted yet !!! TIG
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09Could it be that it bugsplats as it tried to create faces too small?
TIG: If you make a 10m cube and use 1000mm bevel, does it work then? Thomas Thomassen — SketchUp Monkey & Coding addict
List of my plugins and link to the CookieWare fund
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09
Good thinking - although you might think that a simple bevel, with no small faces, would not respond to this (unlike the rounding options that cause NO splats at the 1m/100m size)... BUT I scaled it up x10 [10m cube 1m bevel] AND the bevel works fine for almost all of the time - after many tests I did eot one non-repeatable splat... Seems there's something in that idea ? TIG
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09ah yes that was that! Scale was 1 /100 too little!
![]()
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09Only relevant for bugsplats issues
I still don't understand what is the exact problem. I tried under SU7 with a cube of 10 meters dimensions and a 1 mm bevel, and it works without any splat (though you hardly see the bevel). In any case, as the origin might be subtle, I have equipped the processing methods with a file trace (file FredoTraceRoundCorner.txt in the Sketchup Plugins directory). You just drop the attached file in the ROUNDCORNDER_Dir_20 folder. If you are able to reproduce a bugsplat, could you please send me the text file. Thanks Fredo [Edit 11 Jul 09] Attachment removed. Fix in release 2.0b Last edited by fredo6 on Sat Jul 11, 2009 6:40 pm, edited 1 time in total.
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09Fredo , thank you very much for this tools.
I tested in sketchup 7pro and Sketchup 6pro, and it works perfect. Using Windows XP SP3 in Spanish. If you need any proof of plugins, in particular, just tell me. Tip> Can upload a file with different geometries, to test your plugins? To verify any type of error
Re: [Plugin] RoundCorner 2.0a - 9 Jul 09all works fine here, i tried it on a 20mm box with a 1mm bevel and that works perfect. SU7
however with that special command bar that appears when i hover the mouse over any button there the cursor prompt say invalid ??? Re: [Plugin] RoundCorner 2.0a - 9 Jul 09Yep with little measures that splatting soon as Enter!
Beginning to see the time scroll barr... then plaffffffffff! ![]() Something like these measures for first tool!
|
Who is online
Users browsing this forum: archano, darospa, Google Bot, kajka, ma3awad, manishthigale1881, omaimamaruof and 15 guests