[Plugin Library] LibFredo6 - v7.6a - 25 May 17

[Plugin Library] LibFredo6 - v7.6a - 25 May 17

Postby fredo6 » Sat Mar 28, 2009 11:53 pm

From now on, the information on LibFredo6 is maintained on the Plugin Home Page of LibFredo6. This is also where you can download the RBZ file.

If you land on this page and are unfamiliar with how to install Sketchup Extensions such as LibFredo6 or how to register on Sketchucation, please watch this video:




IMPORTANT: Please upgrade to LibFredo6 v7.6a or higher if you run FredoScale
Note also that v7.6 is required to run Animator 1.6a



LibFredo6 User Manual - English - v5.2.pdf
90
Last edited by fredo6 on Sat Jun 03, 2017 4:13 pm, edited 291 times in total.
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1a

Postby Ecuadorian » Sun Mar 29, 2009 12:18 am

Thank you!
Installed and running fine.
1

Ecuadorian 
 

Re: [Library] LibFredo6 3.1a

Postby pichuneke » Sun Mar 29, 2009 12:36 am

I have downloaded the plugins. I will try to look at the translation files tomorrow.
0
Forgive my spanglish...

pichuneke 
 

Re: [Library] LibFredo6 3.1a

Postby Escargot-Archi » Sun Mar 29, 2009 3:11 pm

Bonjour,

Comment activer l'affichage ?
0
Visitez mon site sur les logiciels d'architecture "grand public" => www.escargot-archi
Notre forum sur SketchUp
Nos fichiers SketchUp

Escargot-Archi 
 

Re: [Library] LibFredo6 3.1a

Postby fredo6 » Sun Mar 29, 2009 3:38 pm

Escargot,

Pas d'affichage. C'est juste une librairie de code Ruby commune a certains de mes scripts, le premier de cette famille etant FreeScale.

Fredo
1
Last edited by fredo6 on Thu Sep 17, 2009 9:24 pm, edited 1 time in total.
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1a

Postby sepo » Sun Mar 29, 2009 7:30 pm

I am getting constant error when trying to extract libFredo6 3.1A
finally got it after 5 downloads....works fine.
0
Last edited by sepo on Sun Mar 29, 2009 8:11 pm, edited 1 time in total.

sepo 
 

Re: [Library] LibFredo6 3.1a

Postby thomthom » Sun Mar 29, 2009 7:48 pm

Have you tried downloading the file again?
0
Thomas Thomassen — SketchUp Monkey & Coding addict
List of my plugins and link to the CookieWare fund
User avatar
thomthom 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1a

Postby olishea » Tue Mar 31, 2009 10:08 am

fantastic work....so easy to use and effective
1
oli
User avatar
olishea 
Premium Member
Premium Member
 

Re: [Library] LibFredo6 3.1b

Postby fredo6 » Wed Apr 01, 2009 7:51 am

NEW VERSION 3.1b available.
It is necessary for running the upgrade to FreeScale 2.0b.

see main message of this thread
http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=17947&p=145336#p144178

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1b

Postby LuckyNinja99 » Mon Apr 06, 2009 11:33 am

I followed the installation instructions on your pdf to the letter, and I'm rewarded with an amazing nothing. You installation instructions are unclear and inadequate
2

LuckyNinja99 
 

Re: [Library] LibFredo6 3.1b

Postby remus » Mon Apr 06, 2009 11:37 am

You wont get anything visible after you install libfred06. Have you installed freescale?
1

remus 
 

Re: [Library] LibFredo6 3.1b

Postby LuckyNinja99 » Mon Apr 06, 2009 12:01 pm

I take back my above post. I've got it to work now, I'm just a bit tired. On that note, well done sir
0

LuckyNinja99 
 

Re: [Library] LibFredo6 3.1b

Postby remus » Mon Apr 06, 2009 12:11 pm

Glad to hear its working :thumb:
0

remus 
 

Re: [Library] LibFredo6 3.1c (9 Apr 09)

Postby fredo6 » Thu Apr 09, 2009 9:11 pm

0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1c (11 Apr 09)

Postby fredo6 » Sat Apr 11, 2009 3:43 pm

NEW VERSION 3.1c 11 Apr 09 NOW RELEASED
Needed for for FreeScale 2.0c
see http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=17947&p=144178#p144178

Note: For those who have downloaded the release (c) of 9 Avril, which was available for a few minutes, please download again the version of 11 Apr.
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1c (11 Apr 09)

Postby McGyver » Sun Apr 12, 2009 2:57 am

Thank you for sharing such awesome tools! You are truly a ruby script-master!
0
User avatar
McGyver 
 

Re: [Library] LibFredo6 3.1c (11 Apr 09)

Postby Couque D`asse » Sun Apr 12, 2009 7:41 am

Hello.

This is Korean language files of LibFredo6 & FreeScale.

I really love this awsome plugin.

Thanks, Fredo6!
0

Couque D`asse 
 

Re: [Library] LibFredo6 3.1c (11 Apr 09)

Postby fredo6 » Sun Apr 12, 2009 11:26 am

Couque D`asse wrote:Hello.

This is Korean language files of LibFredo6 & FreeScale.

I really love this awsome plugin.

Thanks, Fredo6!

The 2 files seems to work, though I can't really help to check with my laptop. At least it shows up in the translation dialog box.
Does 크기 변형 means "Scaling"

If other users want to try, just extract the file and
- drop LibFredo6_KO.lang into the LIBFREDO6_Dir_31 folder
- drop FreeScale_KO.lang into FREESCALE_Dir_20 folder

Thanks very much

Fred
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1c (11 Apr 09)

Postby ideas_arte » Tue Apr 14, 2009 6:23 pm

:sketchstatic: :sketchstatic:

a very useful tool, thank you very much.! :D
0

ideas_arte 
 

Re: [Library] LibFredo6 3.1d (17 Apr 09)

Postby fredo6 » Fri Apr 17, 2009 5:16 am

NEW VERSION 3.1d
Needed for for FreeScale 2.0d (the previous version 2.0c had a major bug).
see http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=17947&p=144178#p144178
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1e (28 Apr 09)

Postby fredo6 » Tue Apr 28, 2009 9:28 pm

0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1e (28 Apr 09)

Postby COSEDIMARCO » Wed Apr 29, 2009 6:24 am

@Fredo6
New Italian translation is ready. :D
0

COSEDIMARCO 
 

Re: [Library] LibFredo6 3.1e (28 Apr 09)

Postby Ton Baeten » Thu Apr 30, 2009 12:16 am

Fredo,

First of all many thanks for all your wonderfull plugins. You have brought SU to a new, unprecedented, level.
Of course I follow the topics on your plugins and try to be as updated as possible, because your plugins already make part of my daily/standard SU tools.
You have just released a new version of Freescale (v2.0e) and following your advise I also downloaded the new
LibFredo6 (v3.1e). For the first time, this release contains a new folder called DEFPARAM_Dir, containing 1 (text)item. But...this file is already in my plugins folder as part of the Cadspan plugin (to prepare SU models for 3D printing).
As usual it is impossible to have 2 files with identical names in one folder........
So here's my question: can I replace the cadspan-DEFPARAM_Dir with yours, without getting into troubles with Cadspan or not? Can both plugins use that same folder without problems??
I have put 'on hold' the update of your plugins upon further info from you, so please fill me in.
0
greetings,
Ton
User avatar
Ton Baeten 
Premium Member
Premium Member
 

Re: [Library] LibFredo6 3.1e (28 Apr 09)

Postby fredo6 » Thu Apr 30, 2009 8:00 am

Ton,

The small text file have no specific use for the script. It is there in the archive to force the creation of DEFPARAM_Dir via Unzip if not already existing.

I incorporated the DEFPARAM_Dir folder (empty with just one small file) in order to be sure this folder is created at installation.

LibFredo6 would normally create it on the fly whenever you deal with Default Parameters, but it seems that in some environments (Mac in particular) and depending on security rules, the creation of the folder from a Ruby script may not be authorized.

When you unzip, and already have a folder DEFPARAM_Dir, it is neutral. Whether you answer Yes or No to the 'Replacement' question from Unzip (or Copy), your existing folder will continue existing, as well as its content.

Fredo

PS: In general, I recommend that you always do a Yes All replacement when unzipping, so that you don't have to worry about what has changed. Also, keep in mind that file names in a ZIP archive go along the folder hierarchy (so it is not unusual to have several files with the same name in a Zip file, but associated with different folders)

Also, I introduce this change in release 3.1c or 3.1d, not 3.1e
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1e (28 Apr 09)

Postby fredo6 » Thu Apr 30, 2009 8:09 am

Ton Baeten wrote:Fredo,

For the first time, this release contains a new folder called DEFPARAM_Dir, containing 1 (text)item. But...this file is already in my plugins folder as part of the Cadspan plugin (to prepare SU models for 3D printing).

Ton,

My previous post was general about the installation.

In your specific case of Cadspan, are you sure the DEFPARAM_Dir folder belongs to this script. Could you tell me what it contains?

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1f (04 May 09)

Postby fredo6 » Mon May 04, 2009 10:04 pm

NEW VERSION 3.1f
Includes fixes for Mac compatibility (web dialog boxes) and Italian translation by COSEDIMARCO.
Goes along with FreeScale 2.0f
see http://www.sketchucation.com/forums/scf/viewtopic.php?f=180&t=17947&p=144178#p144178
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1f (04 May 09)

Postby pecan » Tue May 05, 2009 11:18 pm

When I close SketchUp, my debugger console get the following messages.


C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Core_31.rb:270: warning: parenthesize argument(s) for future version
C:/Program Files/Google/Google SketchUp 7/Plugins/PutOnLayer.rb:78: warning: don't put space before argument parentheses
(eval):1: warning: already initialized constant SU_MAJOR_VERSION
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Mark_31.rb:325: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Mark_31.rb:331: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Mark_31.rb:335: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Mark_31.rb:339: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Protractor.rb:154: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Startup_31.rb:58: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Tool_31.rb:325: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Tool_31.rb:437: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Tool_31.rb:653: warning: don't put space before argument parentheses
C:/Program Files/Google/Google SketchUp 7/Plugins/LibFredo6_Dir_31/Lib6Traductor_31.rb:47: warning: don't put space before argument parentheses
(eval):3081: warning: parenthesize argument(s) for future version
(eval):3104: warning: parenthesize argument(s) for future version
key = Units
value = 0.0
key = StampOffset
value = 12.0
key = GridSpacingX
value = 120.0
key = SmooveRadius
value = 360.0
key = GridSpacingY
value = 120.0
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
free_Command
0

pecan 
 

Re: [Library] LibFredo6 3.1f (04 May 09)

Postby fredo6 » Wed May 06, 2009 8:17 pm

Thanks for signaling this.
These are just harmless warnings about the ruby syntax.
I fiexed them anyway, and it will go in a further version.

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

Re: [Library] LibFredo6 3.1f (04 May 09)

Postby Daniel S » Sat May 09, 2009 7:59 pm

Fredo..

I don´t know if this is the correct place for this request.
Can be added something like this menu to LibFredo6?:
menu.gif

(It is from: http://www.3skeng.com)

This menu can be part of your plugins...

I don´t know if your HoverSelect will be extended to select faces, groups, dimensions... but the idea is to have only one button on the toolbar and with a key you can see and select all the other options with the onscreen menu:
Selector menu.jpg


Example for JPP tool:
JPP menu.jpg


Daniel S
2

Daniel S 
 

Re: [Library] LibFredo6 3.1f (04 May 09)

Postby fredo6 » Sat May 09, 2009 9:38 pm

Daniel,

This is an interesting metaphor.
There are however a few issues with the JPP suggestion, because it is not possble to drwa images (i.e. jpg) in a tool.

For HoverSelect, I am not clear on what it would give on other entity types than edges. But this would be easy to derive (Edges are the most complex actually).

Fredo
0
User avatar
fredo6 
PluginStore Author
PluginStore Author
 

SketchUcation One-Liner Adverts

by Ad Machine » 5 minutes ago



Ad Machine 
Robot
 

Next


 

Return to Plugins

Who is online

Users browsing this forum: No registered users and 10 guests

Visit our sponsors: